Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
If I wrote up everything we'd done on this project it would take up most of CS and Google would fall over trying to index it so consider this the abridged version with lots of pictures in place of several K words :) In short James required a car that would be competitive in Hillclimb and Circuit...
We did a very quick write up in our section on this but here's a more detailed one with lots more photos etc.
Nick Jones Racing comisioned us to upgrade their X85 Clio Cup race car for competitive use in the WSSC Championship, as far as we are aware this is the first X85 in the UK to upgraded...
Fred left the Dynacup at TDF the other day and I had promised to get some figures for him. Got around to it today, vid below :)
dW07_S13hN4
The old girl is pretty healthy!
http://fastcar.co.uk/04570735435878491400/wurz-s-clio-at-autosport.html
Neils mega Clio that Fred and I have been working so hard on recently. We're both very pleased with how it turned out and it was great to see it on the Future Publishing/Fast Car stand at Autosport
:)
Oh its on :D
Remapped Super-Hicas controller to get it up and running before moving the whole car onto an SQ6M.
Just need to design some rear uprights now. Going to aim for a bolt on to a standard rear beam although I may need to shortern the standard rear beam to fit it all in. Upright...
This weekend saw the first Britcar race of the season with BPM fielding the 2009 Spec X85 Super Endurance Clio.
To say it was a challenging 90min race was an understatement with Hail, Sun and Rain all in the race distance and a fairly large crash at the start bringing out the safety car and...
Started at 11 This morning.
By 12pm
By 3pm
By 4:30pm
By 6 - gearbox off, engine ancils stipped, new engine back on stand to recieve cams etc. etc,
Will be cleaning up the engine bay tomorrow and getting a few bits ready for the new engine going in on Monday.
Also need to remember to...
Here's a sneak peek of the Super Cups new colour scheme.
The chequered flags might not make it onto the final one though ;)
Ambient Graphics (www.ambient-graphics.com) Have done the design and I reckon its spot on! They've recently done a friend of mines Elise and their workmanship and...
As I fitted some Bilstein Coilovers yesterday (courtesy of JamSport) and cleaned it today, for the first time in weeks, it seemed rude not to take some decent photos of it:
Renault Badge Quality Control Failure!
Bilstein Coilover.
What CL's do to Turini's!!!
Gear...
And still uses it everyday?
My daily use laptop for data off load from cars, cal work, t'internet etc is a Panasonic CF-27 Toughbook.
It's a PII 300 with 256MB of ram and a 6GB hard disk running XP.
Still works like it was new and manages 3 hours off a full charge.
I've tried to replace...
Built this over the weekend for the Super Cup and for Super-2000 inlet manifold testing:
Not a bad weekends work.
Spec is fairly boggo F4R 736 but with a bit of safety added for sustained high RPM use.
- Brand new F4R 736 Cylinder head incl valves, seats, guides, springs, seals etc...
Only have the old competition list on me.
If someone could check if:
7700107192 - Coolant Outlet Housing/Cylinder Head Seal/Gasket
7700851213 - Water Pump Gasket
7711155368 - Cylinder Head Gasket
Appear on Renault parts system under those PN's I'd be ever so grateful ;-)
Cheers
M
It begins again! Phase 2 of the Super-Cup development program.
Over the weekend I've purchased a lump to build the new engine up from and a brand spanking new cylinder head.
Engine spec is going to be essentialy standard with fresh pumps and tri-metal bearings. Modifications are going to...
Right,
Going to get the Clio wrapped at some point over the coming months as my friendly motorsport graphics place owes me a cheapie.
All ideas on colour/design greatfully recieved. Can be anything really as they can do large format printing.
Camo anyone?
Cheers
M
:D :D :D :D :D :D :D :D
No excuses now for not putting the lap times in though :(
Going to be logging all four wheel speeds, damper travel, RPM, Coolant, Oil Pressure, VVT Actuation, Throttle Position, load (i.e. MAP), Gearbox temp, EGT, Lateral and Longitudinal G and probably a few other...
At 100K miles, showing compressions of (1) 170 (2) 130 (3) 180 (4) 150 with an airfilter from a Saxo VTR that I salvaged from the bin.
That'd be a best of 184bhp then with three over 182bhp, best torque recorded was 156ftlb. Makes over 180bhp at 7200RPM.
If I can be arsed to stick a none...
Just drove it home after its spent a week in the workshop.
Pulls right into the rev limiter on the standard cal :):):):)
Spent bloody ages tinkering with cam timing and I think its worked out pretty well - we'll find out tomorrow!
Cheers
M
Few photos below from this years season. It's the first X85 to be run in British Endurance Racing and as far as we can find out the most succesful X85 there is with class win at the Britcar/Silverstone 24 hour (1st in Class, 16th overall out of 51 starters) and the highest points scorers in...
Build diary of my Clio Super Cup Project
http://cliosupercup.blogspot.com/
In short 100bhp/litre, 200bhp/tonne, road useable, 58.5 second target around Brands Hatch. 7 Day build time. Xmas project ;-)
Cheers
M
Yep the BPM Racing and Gamma Motorsport Clio Cup 197 Enduro took 1st in Class and 16th overall in the Silverstone Britcar 24 hours this weekend from a starting position of 42nd on the Grid.
For the 24 BPM and Gamma had joined forces to field the BPM Clio with Gamma Driver Gary Whitehead as...