Search results

So I was driving las night then the car came to a sudden stop, had a nosey around and noticed there is no fuel going into the filter, the primer bulb looks as though it's been squeezed in and won't release back out. Ordered a new primer bulb but does Anyone know what else it could be? Thanks.

So the car is now 10 years old and it has it's fair share of scratches and scrapes. I haven't caused any, previous owners carelessness. Here are some photos, how can I go about restoring these? Is there anyway that doesn't cost loads? Thanks.

So I was taking the rear passenger shock bolt off and it sheared! Cannot get it to budge :/ anyone any ideas on how to get this out? Thanks.

Got myself a dCi 65 the other week and there was a buzzing sound coming from encode the interior light, never thought much of it until now. Took the light out and the surround and found the buzzing thing, disconnected it and now the car doesn't seem to heat up, looks like a thermostat or...

So I just got myself a DCI 65 on Saturday and I'm wanting to do a bit of a service before I start doing the big miles! Question I have is what all will I need to do? Oil, oil filter, air filter, cabin filter. Anything else? Thanks! Kitson

Looking a new Head Unit for the car, around the £100 price barrier. Not overly fussy but would like it to have Bluetooth and an aux port. Throw any ideas this way! :)

So this has only started the past couple of days and quite frankly I have no idea what it could be. Can anyone shed some light on this? It's coming from the drivers side, like the suspension or something, no idea :/ http://youtu.be/LXGboqw3Kag

So I recently got my Xenon's in and working but only when I've been driving I noticed this problem. There is nothing broken inside them and all the bolts holding the headlight in place, are properly secured. As you can see from the above that the left light seems to be lower than the right...

Was leaving to go get some stuff, car wouldn't start up, just ticked over. Have the wires a wiggle, looked at the plugs and got it going but the check engine light has now came on. Any ideas why?

In need of 4 new tyres big time now. Current alloys are 172 alloys, 16inch . Ip do lenty of motorway driving. If that makes a difference in choices. You lot know more than me, that's why I'm asking. Thanks.

When i release my handbrake it lets out a loud squeak sound, same goes for when i release my brake pedal. Does my head in so much, anyone have an idea?

Over here in heat wave northern ireland my mums mk3 alarm keeps going off for no reason. Its only started doing it now that this heatwave is here. Anyone any thoughts?

Seen you going into the pumps, tooted the horn. Then you came out and were basically beside me heading towards pennybridge.

You sit there a good bit, yellow laminx fogs.

I waved and you stared at me. You were heading into ballymena

Just a quick question, can you fit poly bushes to a non sport? and has anyone done this? Or is it not worth doing? Resaon for asking is my engine moves a heap under acceleration along with my gear stick.

So i put on my 25mm hub- centric spacers and now theres a bad knocking sound, any ideas? Cant get the wheel off again due to the locking nut pattern being crushed.

Got a pearl black non sport rep and want Oz F1s in black but unsure whether to do Matt black, satin black or gloss black. Im leaning towards matt black with matt black grills and fog surrounds. Anyone with pics want to help me out? Thanks:)

So when i got my sport grill i sprayed it black, the usual way, sand, prime, colour and lacquer. Now its very badly cracked and want to respray it, how can I go about with the previous lacquer etc? Help would be great, 100% clueless and dont want to ruin it. Thanks.

Anybody had these before and know if theyre good? Its for normal road use, mainly motorway driving. http://www.ebay.co.uk/itm/Delta-Mics-25mm-Wheel-Spacers-RENAULT-Clio-4x100-60-2-/400315703554?pt=UK_Cars_Parts_Vehicles_Wheels_tyre_Trims_Trims_ET&hash=item5d34ace102

I'm looking a new exhaust for my 1.2 non sport as mine is basically rust heaven and will no doubt go soon. Are there any half decent exhausts out there that are not too loud but yet can make the car sound just a tad better. ​Thanks!

First off, unsure if this is the right place for this but ill continue non-the-less. I made a rep from my 1.2 and have the 172 ph2 alloys but the front wheels are hiding in the arches big time, im looking 30mm spacers to help this but am now wondering would it just be safer to convert them to...

I have a non sport clio with the 172 kit on. The front bumper has the washer jets and I kinda want them to work. Is it worth my while to have these working? Would it be difficult? Main reason being apparently in the MOT it's a fail if they don't work and also its something different for a non...

I dont know why this is happening but the wiper seems to only wipe half of the windscreen. Ill let the picture do the talking, hopefully you get the idea. Any help welcome!

Hi, looking to change my coolant on my 1.2 16V, unsure how to go about it, any help would be great! :) The reason for the change is the car is now 10 and it looks like the coolant is the same age...., brown manky stuff! No idea what it even is. Got myself some Renault Type D coolant and new...

So today i sat about cleaning my car, nothing fancy. Just hated the sight of all the filth. So i replaced my drivers rubber door seal From this: To this: And now some disgusting before pictures: And now, cleaning time!! In the boot, hot soapy water and a hoover! And now all...

Silver, Spotted heading from ballymena to Antrim, just before dual carriageway after the rosses, over a wee bridge which goes over a train track!

Spotted in Antrim KFC/cineplex area. Just drove in, circled then out again!

These are just so much better and appealing than the original plastic ones! Bought them off Austin-182 on here, definitely worth grabbing a set! Excuse the messy car :o

So I was taking my front bumper off to change Over my splitter, had everything done and started to undo the last bolt. Put the socket on, started to turn and nothing, the bolt head went from a 'hex shape' to a circle. Anyone got any idea how I can undo this bolt :(