Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Just found this site some right sights on it but quite liked the dimma on this page
http://www.stupidnorthernmonkey.co.uk/page2.htmhttp://www.stupidnorthernmonkey.co.uk/page2.htm
anyones on here? Aslo somehow (most stupidly) they give a V a sl*gging! WTF
Jase
Right then, the dampers on the valver are fooked, just got some delivered to put on, question is how easy a job is it? Any tips from peeps that have changed the rear dampers themselves?
Thanks
Jason
Gave it a bloody good polish and took a few pics!
http://i2.photobucket.com/albums/y48/jase16v/cliojune05011.jpg
http://i2.photobucket.com/albums/y48/jase16v/cliojune05001.jpg
http://i2.photobucket.com/albums/y48/jase16v/cliojune05006.jpg
Where are the mounts on the valver? I have recently developed a knock when pulling off, feels like the lump is moving backwards, thought i might have snapped/broken a mount?
Jase
Did anyone else buy any at the weekend? If you did put them in you might get a suprise.
I bought the side light and reverse light fitting with both packets labled WHITE
about pissed myself when i put them in and switched them on. Christmas tree or what! Blue Green Red Yellow purple wth
At...
Just incase you ever have a mad moment and think "ill steam clean the engine bay"
DONT
Two days of headache, several hours of trying to dry things and around 25 30amp fuses later!
JUST DONT DO IT!
http://forum.cliosport.net/display_topic_threads.asp?ForumID=2&TopicID=162906&PagePosition=1http://forum.cliosport.net/display_topic_threads.asp?ForumID=2&TopicID=162906&PagePosition=1
Really dont know what to try pls help
Right ive had the sh*test day i can remember
I took the car to have the engine steamed this morning, drove back from there fine then started to spluter a bit! Parked up and as i did the car cut out, tried everything and still wouldnt go (no spark). Towed it to the garage and after an hour or...
Hi all
I have recently lost my locking wheel nut key, they are tri locks apparently. the key has three studs in it arranged in a triangular formation. The nut itself has a small sleve around it and obviously the three locating holes.
The question is if anyone has any of these lying around...
Thinking of buying some turbines (in grey) of the site can someone shop them onto the valver pls
Jase
http://i2.photobucket.com/albums/y48/jase16v/tints.jpg
A very cute girllie has just bought this below and has this pic as her screen saver. Can someone please shop the plate to say KERRY 1. I know its sad but will make her smile and she is seriously fit.
Jase...
Went to change the oil on the valver at the weekend thinking it would be a socket or alan key and i now know its neither. From the looks of it its a square key does anyone know what size this is so i can make one up. Looks around 10mm but just want to check to make sure i can change it tmrw...
Hi all
I need the part number for a starter motor for the valver (95 M) please, also does the starter fit off any of the other clios as the local scrappy has a few N - R reg assorted clios in
Thanks in advance
Jason
Anyone changed one of these? Mine has started playing up/sticking. Just thought id ask advice as the advice i got on the altenator change was superb and turned a nightmare job in to a very easy one.
Thanks
Jase
Finally finished the bump strips on the valver, thought i could do it in a day or so but not that lucky! A week later and there back on the car. Really pleased with the outcome. One more job ticked off before the fcs
http://i2.photobucket.com/albums/y48/jase16v/colourcoded.jpg
Door handles...
Just a quickie, the tiny dent marks left after some w*anker has let his/her children open their doors onto yours in a car park how can you get them removed?
I have two very small dents on the drivers door on the valver any ideas? They are right on the crease line of the door panel
They...
Well its not far away and theres a few bit i need before the french car show. Is anyone else in a simlar predicament?
So far we have front springs (not sure which yet)
Front/rear adjustable dampers.
Also a few hours on preping stone chips! Possibly a quick wheel re-furb depending on time...
Since lowering the valver its braking harder on the rear, i havnt adjusted to valve yet, any instructions or help appreciated before i end up sideways on a wet island again!
Jase
With reference to my other thread about loosing my locking wheel nut thingy. Has anyone got on that looks simlar so i could try and contact the manufacturer? I know its a bloody long shot and a really sh1t sketch, however i got a B in art i will never know!
The old key thingy came in a tiny...
Well after much p1ssing about with lowering and raising the torsion bar i have lost my locking wheel nut thingy! What do i do? Ive heard of people chistleing them off but the bolts are at least an inch in to the alloys? All ideas more than welcome.
Dont know what make the nuts are but they...
For some reason my passanger side electric window has stopped working. At first you could put it down but not up with the passanger side control but it was fine with the drivers control up & down? Now it has just packed up all together. Help pls, what will it be
Jason
[Edited by Jase16v on...
After an afternoon with the polish took some new pics now its lower. Comments always welcome...
Jase
http://i2.photobucket.com/albums/y48/jase16v/b2e0100c.jpgU face=Times New Roman color=#0000ff http://i2.photobucket.com/albums/y48/jase16v/b2e0100c.jpg/U...
Hello all
A girl i work with is going to view a couple of dcis, what sort of mpg do you get? She travels 50 miles a day to work and needs to save some money on juice!
Thanks in advance
jase
Right all geared up to do the torsion bar at the weekend. From what i can see each spline is around 30mm. For the people who have already done this is it advisable to go one spline or is 60mm on a valver too much?
Hi all
After trying for months to find someone local to reset the torsion bar on the valver i have finally given up! So im going to atempt the job myself this weekend... I have printed off the guides i have found and all seems quite straight forward. Just wondering if there is any other tips...