Search results

I neede to replace this on my 1994 1.8 RSi.... Got the old one out no worries, when replacing with new I got carried away and snapped the bloody thing off flush with the block :( Any ideas/help with removing it so i can try again ???? Thanks Keith.....

I am having a fookin nightmare with my RSi at the moment:mad: It starts fine but the moment you depress the accelerator it stalls :dapprove: After a few attempts it does eventually get going, this is baffling me :S It does this when its been left for a few hours, starts and goes fine if only...

Thought i would post up a couple of pic's of my ickle run around...... A couple of reflection shots !!!!!!!:cool:

Smart looking Willy in Exeter today about 5pm tonight :cool::cool::cool: I let you cross in front of me ;)

I have a set of Renualt 19 16v phase 1 alloys with no centre caps Are these the right ones ??? Cheers in advance :cool: http://cgi.ebay.co.uk/RENAULT-9-11-SPEEDLINE-ALLOY-WHEEL-CENTRES-x-4_W0QQitemZ200080034452QQcategoryZ10410QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

I have had no end of problems with my coolant system since having the coolant changed :( The latest one being the engine oil cooler.... It has rusted through the inlet and outlet pipes :( I have by-passed it for now, but was wondering how important it is, as a local Renault guy has said he has...

Had this part go on me today, just below my top hose :dapprove: Its solid metal i think and a small hole has appeared on the corner (the clean bit) of the bend..Thus spitting all my coolant over the floor Firstly i dont know what the part/pipe is called (so cant order a new bit) And also how...

I am going to be changing my g/b oil next week and was wondering if the drain plug is the same as the engine oil one ? Had to drop the car back down and bugger off to Halfrauds when i changed the engine oil as i didnt have the correct tool to undo the sump plug :o Just want to avoid this...

Hi... I have a Mk1 RSi, I checked the coolant level today and its a orange/teracota colour.... What would make it this colour :S:S Thanks in advance

Thought i would post up a few pic's of my last car. It was written off, so i decided to go in a different direction with the payout ;):cool: It was a MY94 Jap WRX running a few engine mods, and a few handling mods..:cool: Was running approx 280bhp 270 ft/lb

Has anyone got any pics of a Naples Clio with full/part Graphics ???:cool: Thinking of doing mine, but with just black decals... Cheers Keith

Looking at getting a alarm for my car.... Which ones do people sugest ? I aint looking for "all sing all dancing" ones just something with remote locking and the basics.. Any help in where to get it as well please :) :) Cheers Keith

This is now the second time in the short period i have lived in Bridgwater, that my car has been vandalised Firstly i had the passenger door lock fooked, but no entry to the car, this time the little fooks have bust the rear hatch lock and well and truly mashed the passenger lock/door...

On my way to work this morning, saw a very nice blue PH-Quick with (i think) red/orange wheels and roll cage. South bound on the M5 Taunton to Exeter... Was peddling my RSi to keep up :cool:

Does anyone know how these need to be fitted? I've just got a set from K-Tec Racing, but all the instructions are in German!! :S Cheers Keith

After lowering my Mk1 RSi (about 50mm ish) i am ready to put on some valver wheels. I bought some with tyres already fitted, but they dont fit :S The tyres i have on now are 175/60/14's and fit perfectly The tyres on the valver alloys are 185/55/15's and dont fit at all :( What size tryes do...

I have a Mk1 RSi and have just fitted a 16v bonnet... The only problem i have is my strut brace......wont go under the valver bonnet :( Any usefull ideas ??????? Cheers Keith

I am looking at a K plate valver on Sunday.. All i know about it is, New 16" 5 spoke alloys+tyres, lowered and its the williams blue and thats about it... The bad points are a quite loud tapping when first started, gets less noisey as it warms up, scratch down one side and no tax.. £300 I...

As per the norm, my 95 RSi has a leaky sunroof :( Yesterday the car wouldnt start, the recovery guy said it seemed to be the imobiliser. The remote locking hasnt worked since i bought it in Feb. I have taken the remote sensor apart and the board is quite rusty :( and 2 of the resistors thingys...

In Bridgwater town centre lunch time today.... Dont know if your on here, I was in the RSi in front of you :cool:

I have now found somewhere that will do my tracking and allignment, but they have said I need to provide the settings for them. As the car is lowered around 50mm and is due to be used on track as well as the road, what settlings should I be using?

Which size tyres should i run on valver 15" wheels...??? I am putting them on a Mk1 RSi which has been lowered about 50mm ish. I have been told 195/45/15 but am unsure whether they will fit under the rear arches :S The tyre guy said i need "narrow" fit ones though :S:S:S I thought the best...

Can anyone suggest anywhere in the Somerset/Devon area where I can get my tracking and alignment done? My car has been lowered and I have been told by a couple of garages that they can't do the tracking and alignment as they "can't get the machine on top of the wheels"... But surely not every...

Currently have 175/60/14 on a Mk1 RSi (think it's original wheels). What size tyres should I put on 15" alloys?

How much is one notch/spline on the rear torsion bar of a mk1 RSi? And is it worth lowering to improve the handling? I have just fitted the Ultimate Suspension Kit from K-TEC Racing, lowering the front end about 35mm and had the guys lower the back end one notch...... This however seems to...

Can i put a 16v head, on my 1.8 8v RSi ???? And is it just as simple as that ?? Any helpfull hints and tips would be GREAT :cool:

Does anyone know what sort of decibel (sp) level i would be getting with a complete KTR straight through system with decat, on a 1.8 8v RSi ??? (without silencers) Thanks in advance :)

I have a 1995 Clio RSI, 8valve mk1 phase2 which is due to go round Haynes in June, but it is 100% standard. Any advice is welcome... Current plans are to lower by one notch, put 15/16" alloys on, front strut brace, tint windows, new exhaust, air filter. Is there anything else I should be...

Washed my RSi for the first time since buying it today... And went for a drive, only to find huge amounts water coming in from the trims around the sunroof :( Is this a common problem with Clio's or have i just got a dodgy s/roof ??? Cheers Keith...

I have just bought a Mk1 Phase 2 RSi.......At least i think thats what it is :o Its a M plate RSi, i think this is a phase 2 ( please point out if i am wrong ) I am looking to take it around a small local track (Haynes motor museum) so any ideas and helpful sugestions to improving the...