Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Does anybody use a water de-mineriser when washing their car. An inline one that connects to the hose pipe. If so are they worth it? as i live in a hard water area and it always leaves streaks when washing the car.
Any recommended ones would be greatly appreciated.
Thanks,
Mark
Looking to do a suspension refresh on the front shocks. Replace the wishbones, track rod ends, ball joints etc and all bolts at the same time.
Can someone post up the dialogs page with the parts for a clio 182 ff
Many thanks,
Hi i have a clio 182 with cup pack.
The traction control light is up and it says service. I assume this is a ABS ring probably cracked??
What number of teeth does it have on it and is it wider than the standard one.
Unable to jack car up at the moment to check.
Thanks,
Mark
My clio is in need of a new clutch. The car is currently my second car and is garaged. Its main use eventually will be for track days and spirited drives. What is the best clutch to fit or would you recommend OEM?
Also whilst the box is out is it worth getting it inspected and roughly how much...
Will the 172 indicator stalk/ horn work on the clio 182 without any wiring mods and work?
I have purchased a aftermarket steering wheel without the horn button.
Thanks,
I am in the middle of changing out the auxillary belt and tensioner on the clio. Checking for play in the bearings i found the air-con compressor pulley will spin around on the shaft without actually driving the compressor.
How do i tighten this up or is it u/s now??
Pic below of compressor...
I have recently just fitted a new rad and fan to the front end of the clio. What temperature does the fan switch on at?
Also when connecting the RS tuner up to the car i get a fault:
- Cooling fan 1 relay on activation
Anyone any idea what that is or how to fix it. I tried to run a actuator...
Does anybody know the part number for a new thermostat for the Clio 182. The gauge on mine is reading a little high and the stat hasn't opened up.
Also the price please.
I have removed my rear brake calipers for overhaul and refitted them but cannot get them to stop leaking when pressuring them up from the hose. Can anyone shed some light on what i am doing wrong! I have tried tightening them as tight i can. Do the flare fittings seal again once split?
Thanks, Mark
I have found that the brake bias adjuster clip has broken off due to the arm seizing. Can someone help me out please by telling me the part number for the clip. The renault guys can't seem to understand the picture.
See attachments.
The hole seen on the bracket from the rear axel is where it...
I have just fitted some overhauled rear clalipers. When i fitted the brake line fitting and primed the system it leaked through the threads. I replaced the brake fitting and it still leaks..
I checked the face of where it seals and it looks clean. It just won't seal? I tried to fit it three...
I have had my car in the garage over winter and have not driven it for some time.
I went in the garage after the cold spell and there is brake fluid all over the garage floor. It appears the seals has failed on the onbe of the rear brake caliper and dumped it all over the floor.
I can't...
i have a clio 182 ff with aircon.
I would like to remove the aircon completely. To do this what would i need?
- new alternator
- cup alternator bracket
- cup aux belt
- manual blower system control unit
part numbers would be greatly appreciated.
Will the manual blower system controls out...
The garage has just recently fitted new discs and pads in the last month. I braked hard today and it swerved slightly to the left.
I had to brake from 70 as someone pulled out on me.
What the usual suspect
- tyres pressures
- caliper sticking
- air in brake lines.
If it pulls to the...
Does anybody know the part number for the abs ring on the front driveshafts for a clio 182/
one of mine has cracked. Do you need to fit a complete new driveshaft or can they be removed on the RS models?
and does the 182 have 44 teeth\?
I stripped the brakes down the other day on the front and rears. Noticed that the rubber boots for the sliders are ripped on the front calipers and on the rears.
Is there a caliper repair kit you can buy from renault and if so is there a part number. also need the rear caliper small bit of...
I have a clio 1.2 16v extreme. It sounds like the inlet manifold is cracked and letting air in. I have tried to feel for the suction but can't find it.
The inlet manifolds on the clio are plastic so it could be one of the plastic welds? anyone else had problems with the inlet manifolds or...
Does anyone know where i can get some tyres for the lotus exige s cheaper than this fitted.
Front 2 x Yoko A048's 195-50-16 W
Rear 2 x Yoko A048's 225-45-17 W
compound is medium i think or whatever lotus compound it is?
price quoted £700 fitted!
surely you can get them cheaper than this!
Just fitted the recaro trendline seats to my car. Are the seats supose to tilt forward and slide forward like the standard 182 seats when the handle is pulled to get in the back seats os just tilt forward.
I am also unsure where the cable wire goes. Does it connect to the same place as on the...
I have a pair of clio 182 seats that i need to sell not the cup ones.
They have subframes but the pretensioner has been removed.
what is the going rate for a pair of these?
tried using search but not many came up and most don't sell subframes.
My battery light and stop light came on the other day. I checked the voltage at the battery and it was 11.4V. I decicded it needed a new one so went out to buy one today.
Fitted it and the voltage is now at 12.28V running. The problem is the battery and stop light have not cleared?
I have...
My passenger side washer jet is leaking. I am ok to change it on my own. Took the arch liner off and am confident it can be took off without removing the bumper. I assume the rubber hose is just pushed onto the washer jet its not clipped in place or anything?
I have crimped the rubber hose...
changed my wheel today and noticed that there two lugs on the back of the clio 182 wheel and not on the omp boss.
Do you need these lugs on the wheel (see pic below) to drive the steering wheel position sensor? Look at the two slots at the 3 and 9 'o' clock positions.
i am going...