ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Clio Cup Track Toy Project



  Clio 182 track car
I am thinking of doing the same but as it will still be a road car too I will have the numberplate removable so I can take it off easily when ion track.

Ditto, there's a chance I may end up taxing and mot'ing it yet just so I test drive before a track day etc. I'll be adding some captive riv nuts to the bumper so the plate can be removed easily. I'll post some pics up once done.:up:
 
  Clio 182 track car
A couple of more parcels arrived this morning. Passenger foot rest....

1DB5BF88-77A2-4D58-A7FE-021C26C6B9A7.jpg


And a driver foot well heal plate...
58D78AC9-E2ED-45CA-823C-BDEC4471BF93.jpg


Added some grit tape...
1ED5C691-8E46-4900-A313-06D15F89F216.jpg


C59F8ED4-7814-460C-9E47-8E1A9D7CCB10.jpg


:up:
 
  Clio 182 track car
I've been on the look out for a second set of 15" alloys to use as spares or even to try run slicks on the track. Came across these today, might not be the best looking wheels but for £50....yes £50 inc good tyres all be it budget crap, I just couldn't refuse them...
9AE07045-B6F9-44D2-9F8E-266E8371D1FC.jpg


Give then a run down and then a few coats of white paint and they should look ok ish.
 
  Clio 182 track car
Today's job, modify the TRS tow eye to accept a new m16 bolt to fit to the standard clio towing eye bolt hole. Existing hole in the tow loop was only 10mm so need opening up to 16mm..
1A1CF100-DE6B-4035-8185-AD7EDEFFA75D.jpg


New bolt now fits...
989C0C47-301E-439C-9F72-652A8BA81753.jpg


Then bolted in place...
C86C15EC-B9C6-40FC-9D72-E7A864424E90.jpg


Bumper back on...
7DE53305-4DB3-405D-B802-DDE869682CF4.jpg


5CC085D4-B3D3-4358-9D71-57EC3F9E01AB.jpg
 
  Clio 182 track car
Sourced a centre console to go back in the car as it weighs literally naff all without the ash tray etc and makes the car much more presentable inside, so fitted it today...
184673C9-F736-4CFF-B124-2AB72C3D46E0.jpg


Next job was the battery kill switch, I was unsure were to mount this bit eventually decided to bin the two lights on the DIN switch panel and add it there so it was in reach and inline with every thing else...
BADE2163-DD15-46B2-A0DA-94062BC49350.jpg


3EC33F1A-8A5A-4FCB-BB99-864ED2F23818.jpg


Then as the weather was ok for a change, gave it a good wash, polish & touch up where needed....
714F9575-7FE1-4907-9CC3-698190A5E293.jpg


B7517B8F-8150-4B22-BDEE-DE9342F4F0C2.jpg


:up:
 


Top