abs

I have put a Sparco wheel on and this has brought up the abs traction control and serv light.... I have had the wheel of a number of times and at one point I got the abs light to stay out.... I then returned, so I replaced the squid and I can now get it to turn all lights off until to move... I...

For those of you (not many I know!) that have converted the rear beam from drums to discs, have you encountered any ABS issues? I know Tom (?) who used to be at Wests didn't have a problem bar changing to 1.6/DCi 100 rear sensors (due to the plug), but even with the correct sensors, Mines still...

Has anyone bled their brakes with the RSTuner module? How did it compare to say using Clip? Just wondering if it's worth getting for bleeding the brakes 'properly' and activating the ABS pump Or would it be better just to borrow someone's Clip every so often? Thoughts and comments from...

Was siting in my 04 plat 182 other day and the light came on the dash I turned the car off and when tried to start it it would only turn over 4 a second and sounded the the battery was flat but wasn't had to bump start it and was fine after that. Then today on way to work done the same an have...

Hi, Does anyone know if the Clio 182 has an anti skid system ? Basically the rear of the car when unsettled applied the brakes ... this was happening to me through paddock bend and entry into clearways and was really unsettling the car. Anyone know of this ? Any pointers appreciated ...

As above, tried to plug one of the DCIs in this morning and it cannot connect with the ABS. Checked the internal fuse and that's fine. Connects on the other DCIs fine :)

Hi guys was woundering if anyone has done this. were planning on having no ABS in the 172 so as where at it may as well run all new brake lines with a brake bias for the rear. has anyone got a brief overview of what needs to be donw with the Clio. Cheers Cliff

My front abs ring has split on my 182. Just wondered if anyone knows best place to get one and if there expensive? Any info would be great cheers

Picked up a 172 this week, pretty much perfect, but there's a small kick back in the brake pedal at low speeds when braking. Feels a bit like ABS, but no lights coming on dashboard? Any thoughts welcome...

hi all i recently fitted a new gearbox , i now have abs , esp and serv lights , any ideas what this could be ? it was not on before this , thanks

Can I get an ABS ring without buying new brakes? I think I've cracked mine on the rear passenger brakes and could do with getting it fixed rather than getting a new set of brakes. If this is possible can anyone point me in the right direction for one?

My abs pump is knackered on my 172 an the garage I have took it to are struggling to find one for me an apparently the numbers on it are barely readable, so was just wondering if anyone knew realistically how many different part numbers there could be for this part just incase I can't get them.

I dropped the engine and gearbox out of the car and the steering came loose in the car, now the Three lights are on the dash, where do i start? How can check that the steering angle is right? do i need a diagnostic machine?

Ok I have a ph2 172 on an '02 and it's being turned into another track car. just want to know what parts are needed to convert to cup spec? so far I understand I need... Cup master cylinder, new steel brake lines throughout, somebody with Clip to tell abs light to stay asleep, anything else...

hi,has anybody changed/had the rear abs sensor changed on a 172? my rear passenger side one is faulty just wondered if this was an expensive,tricky thing to replace? i see on renault spares a new 1 is about £137!

http://www.ebay.co.uk/itm/RENAULT-CLIO-YELLOW-AND-BLUE-CUP-SPORT-COLOURS/301090076514 Someone is going to snap that up at a right bargain price!

Anyone know the size of the bolt that holds the ABS holder onto the front shock?

On my 182 race car I have the ABS and ESP light on. After I bought the car a few months ago, I drove it for 3 days (with no lights on the dash), I then started to take it apart and start making it into my race car. I've had the engine out, totally stripped the inside, fitted a 6 point cage...

http://www.pistonheads.com/classifieds/used-cars/renault/renaultsport-clio/renault-clio-x65-renaultsport-182-16v-2004/2000915?isexperiment=true mmmm

When you screamed up behind me then sat on my back bumper in a 30mph zone, were you expecting me to race you? Or were you trying to see what radio station I had on?? I had three kids and my wife in the car, which you could see as I went past you as you joined the roundabout, yet you still felt...

My ABS sensor on the drivers rear right needs replacing but finding the right one is proving difficult, we're presuming this one below is the correct one as it doesn't say its not for the cars equipped with ASR. Could anyone help...

Hi all , followed a guide on here as my clio is a track car and has buckets fitted so no airbags, i fired the m3r3 3.3 ohm resistors to the correct places in the black and grey plugs, started the car up and the serv light and abs light went out but only to come back on after about 5 seconds ...

Clio 182 needing a rear abs sensor can I buy a Bosch or other banded make or does it have to be from a dealer ? I resd elsewhere on the forum by a post by Fred saying thst it's dealer only yet see them on europarts by Bosch for £39 a 3rd of the price for the same part from a dealer

airbag and serv light on. any ideas? i have tried playing with wires under the pass seat but to no change.. i heard i might need a new ecu and that would have to be re programmed im guessing. but any over ideas? TITLE WAS MENT TO SAY AIRBAG

Following on from this thread last week; http://www.cliosport.net/forum/showthread.php?727731-Rear-brakes-jamming-when-pulling-away-1-2 This has happened, can anyone confirm if this will be related to the work done at the garage? thanks

Hey guys, building myself a 172 race car and as standard it has abs as its a FF 172. Anyway im about to build up my copper lines and was wondering, do I keep my abs or do I take it out and fit a bias valve? I know its not a bosch motorsport system but surely theres an advantage to be had with abs?

Guys, I've been having problems with the flamer for a while regarding it popping a brake fuse and going 50/50 on the bias. I thought it would be the wire behind the heatshield on the bulkhead, but it isn't , can't see any obvious signs of damage to the loom anywhere. What parts do I need to...

I need x2 new front abs rings for my Ph1 172. I was wondering if anyone could tell me how many teeth the rings for Ph1 have?

Can someone tell me the torque for the big bolt that holds the bottom of the shock to the subframe? Also if there is a specified torque for the smaller 17mm nut at the top. Done a search on here but cant seem to find anything. Thanks Paul

Hi everyone, Ok so bit if his history first. I had a abs fault about a month or so ago, plugged diagnostics in and had an unknown fault code, did a live data run and found the L/H abs sensor was reading a different speed to the other 3 sensors. So assumed it was the L/H sensor issue. Replaced...