Search results

Since my battery died and i replaced it i now have a new Airbag fault, plugged the RS Tuner in and this is what i got: 'DTC9044, DF0187 - Ignition (trigger) Line Configuration (Incoherency, not plausable)' Unlike other faults the RS Tuner won't clear this one? Anyone have any idea's what it...

I'm after one of them paintless dent removal guys for a few dents i have, does anyone know someone who comes recommended? What's it likely to cost too? Thanks Lewis

So got the car running today finally and now i have another problem, after about 10 minutes of driving the stop light come on and it was then i noticed the temperature and the car was over heating, i pulled over to let it cool down, checked i had coolant, which i did, after 5 mins it had cooled...

Few bits i need to get rid of on ebay... http://www.ebay.co.uk/sch/Vehicle-Parts-Accessories-/131090/i.html?item=190765984153&ssPageName=STRK%3AMESELX%3AIT&_ssn=l3wist

Ok so took my car for a spin last night, got about 2 miles up the road when the engine just cut out on my car. I now have an engine light with stop flashing as per this video: The ESP, SERV and ABS lights were on before as i need a new front ABS sensor anyway. I also have the following fault...

Sunday i purchased some H&R coilovers off another member, i received them today, to find the bolts that holts the rear spring adjusters are missing :dapprove: I've PM'd the seller who has told me that he had a garage remove them so he was unsure of what should be included. I have now looked at...

So i bought a second hand RS tuner off a member on here and bought the 98 ron map today, got the email through and it says: Clio 2 K4M 6400_1408_RON98_0910.cal: 04f939a0cb1ce567ff55558bd5d068b9 My car isn't a K4M it's an F4R!? Have i been sent the wrong map, or does it just say that for some...

Since re-fitting my engine i now have these lights on. Before the engine came out the drivers side ABS sensor wire melted on the exhaust manifold, it hadn't caused these lights to come on at that time as i didn't know this had happened untill the engine came out i decided i'd repaired those...

Ok so my 182 i got cheap as the clutch was slipping, anyway changed the clutch, put it all back together, and i noticed that when putting the cable on gearbox that i had to pull the lever in alot to get it in, so once the cable was on it held the clutch slightly engaged (if that makes sense.) So...

So anyway after over 2 months of not having an engine in my car i set about re-fitting it this weekend. So when i got round to connecting all the wires i had forgotten where most went lol. So first i have this one, was near my rad fan plugs. Then it came to brake vac, there seemed to be 2...

Due to potential house move soon, we had a bit of a clear out this weekend. Clio parts men & women designer clothes :) Cliosport discounts of course :) http://www.ebay.co.uk/sch/l3wist/m.html?item=190730925833&viewitem=&rt=nc&_trksid=p4340.l2562 Thanks Lewis

Ok so following my project thread which got mixed replies, some saying yes, some saying no i really don't know if my 182 engine is meant to have a bearing on the end of the crank. So i bought the 182 with a slipping clutch, and thought nothing of it as i was planning on swapping the engine for...

Following this thread: http://www.cliosport.net/forum/showthread.php?646822-Breaking-Top-Spec-White-ph1-track-car-Updated-parts-PG2/page4 I have now listed most of my parts on eBay needing the space in the garage now...

Got my shell on eBay if anyone is interested :) http://www.ebay.co.uk/itm/190703891989?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Question as per title really? Got polybushed wishbones on my ph1 sitting outside, would these fit the ph2? Would sub frame fit too? Thanks Lewis

So last week i found my self bored and doing random searches on eBay... When i stumbled across a Megane 225 engine, newly built with brand new bottom end and low miles top end converted to fit in a 1*2 and a JC5 gearbox, the seller only had 1 positive feedback so stuck a low bid on, then started...

Picked up a BG 182 today with a few problems, one of which being the starter motor, the seller (good mate of mine, forum user too) went to start it today at work and nothing happened, when the car came to life after a bump start he was certain it was the starter motor. Although it's since been...

Downloaded TomTom western Europe app for my trip to Germany this weekend as i'd rather not take both the sat nav and iPhone :) But it keeps saying poor signal and doesn't seem to be working, is there anything i need to do?? Thanks Lewis

I've got FK Konigsports on my clio at the moment, just loaded up for Nurburgring and noticed this: Little if no play in them at all, this is how loaded the car is: 4x Wheels Trolley jack Tools Tent Sleeping bag Helmets and that's it for now, need to get more stuff in as yet! But even when...

Ok, bit pee'd off to say the least as Nurburgring is 2 weeks away, changing my wheels today i noticed that the whole wheel/brake disk wobbles. Could this be the wheel bearings? Everything is tight, i checked driveshaft, brake disk, spacer, hub to coilovers and they are all tight. I also had...

Hi all, this is an area i'm pretty thick in tbh. Want to address this at the weekend in my preparation for Nurburgring. All i need to know is what should i get all these factors set at front and rear for a good track setup. Please note although my car is road legal, it's predominantly a track...

Saw you today as i was coming off A11 onto a roundabout somewhere in Cambridgeshire, i was on my way to Sawston in a Jobs Worth Doing Transit van, i did look and try to get you attention but you'd of never noticed me (i was in passenger seat) lol.

Just picked up a Sabelt Taurus seat and don't know what side mounts to get, are they all universal fitting? Thanks Lewis

Had a week off work this week and went round my dad's who was having a sort out and found my old Toshiba Satellite P100-240 laptop. My mum broke the screen when cleaning by shutting the screen and not noticing my ear ring i'd left on it which cracked the screen. At the time she put a claim...

I'm after a new drivers bucket seats, I've managed with a cobra Monaco s for long enough now, I find it very hard and uncomfortable. I'm looking for a seat that could run a 5 or 6 point harness, offers a lot of support and really holds you tight and most importantly, comfortable for upto 4...

Met up with Rich today (Liquid Yellow 182) to get some pictures of our cars, he also shew me a few tricks on my camera so i can now take a better photo :D Here are the pictures. I'm sure Rich will be along at some point with the pictures he got.

I had this come with the clutch kit, there is a set of instructions that looks like it goes on between the clutch and flywheel, but there wasn't one on before, so i left it off for now, but would like to know what it is, can soon put it in as the engine is out.

As you may/may not know, I have RS Tunings ex demo clio which when Paul built he completely removed the interior heater, that i can live without. Although it leaves the problem what to do when the windscreen mists up. So im looking at getting something for this. What has anyone else done that...

NOT clio fitment, would need centre bore's boring out i believe, but with at ET32 offset would be similar to running 5mm spacers. Could be a cheap buy if you can get them machined out...

I have a bad habit of cracking screens, last time i took the plunge and bought one off ebay to repair myself, although it was very cheap and with loose change in my pocket the screen cracked! :dapprove: So i need to know if anyone have any sites they recommend that sell the screen +...