Search results

Is it just me or when describing us removing the engine weight the attached picture just makes it look like we've removed the engine mount haha. And the less said about carbon canister removal the better I think. Although a picture of my mums face when I suggested doin my own stitches with some...

The bolts are there for a reason, rivets just won't hold it due to the multiple curves. Tbh a few bolts in the back window are the least of our worries when there's a big slash in the bonnet, a crease all down the drivers side and number plates which say shed, if you haven't guessed from the...

Slider done today keeping with the ghetto theme it looks home made like it should on this car lol And tidied up the insides of the doors with some edging tape stuff??

If i start to feel faint i'll open the door.

I'll put a pick up 2morrow dude, Its not perfectly straight out of the throttle body but its near enough

Oh an just a note for kev, your cleanin the inside 2morrow haha :)

Couple of little updates, Removed battery and relocated ecu. Run a power cable through the car and put the battery in a box in the boot. I also repositioned the airbox to eliminate the 90 degree bend, but i forgot to take a pic of that.

Nothing on the car is unsafe, i've made sure of this lol. But yeah i know what you mean theres not a lot to keep it rigid. I'll just let ash or kev crash it :rasp: I recon about 1k - 1.5k including the purchase of the car. Cheap and cheerful ;) Cheers mate, i want to get it weighed and...

I am currently removing the aircon from the track shed, the system is dry there is no pressure at all in it. I am wondering can i just get some tin snips and cut the pipes at either end and rip the lot out? Obviously the pump will still go round but it just won't do anything. Will it be ok...

Yeah the strut brace will be bolted to the towers, Tbh placed the harnesses in this afternoon an they look a bit sh1t going back to the strut brace so think they will be going to the rear seat belt anchor points.

Few quick updates, Paint arrived so i've cracked on with painting the wheels, just need to get the 888's fitted and ballanced now. Made a strut brace for the rear which i'm quite pleased with. (Don't know whether its best to put harnesses to this or bolt to the floor though so expert...

I have left the original locks in the doors if you look they are the bits sticking out, you open them by pulling on the wire for now but going to sort this out when the big stuff is finished. Yup kev is still banned, wat a clown

I know its been a bit slow lately just waitin on parts atm, every1 seems to be skint all at the same time, Not much to do now should be out soon. I will check and double check the lines as brakes are the one thing i don't want to fail

Few updates, All polycarb except rear screen have been fitted, Door skins removed, old rubbish tyres have been removed and the alloys have been primered. Just need to spray in some wacky colour now and get the 888's fitted. Then i gotta fit the braided brake lines. And next big job is cage...

Re: 3 Months of Trophy.. Progress thread. Very nice motor fella

Kev Banned hahahaha Anyway grill done looks loads better now actually like a car ;)

That would probably be me :clown:, oh well u all knew what i ment

Umm any chance of swappin sim cards 2morrow lol

Even better when you've got three peoples phone book worth of contacts;) lol.

The rear screen is slighlty bent both ways yeah but since its over a wide area i think we mite get away with it. Rivits round the outside and tigerseal to make it watertight, jobs a gudun

A sheet of 2mm perspex is only £30, if it doesn't work then fair enough, If it does work then thats £100 saved to spend on something else

Tbh the side windows wern't a lot heavier than the perspex but when your goin all out weight loss then every little helps. The rear screen was just as easy to take out as the side windows its only bonded in. The rear window is a lot heavier perspex is a must for that. Oh and the seat is quite...

We know the tiger seal doesn't look the best, but it does the job, This cars never going to be a show winner lol

Right made a fair bit of progress over the last couple of days, but i'll let the pics do the talkin. First exhaust Then Windows Next job is a sheet of 2mm to do the rear screen. And somehow get this grill off the back seat of kev's car and onto the...

Looks ace mate some top work gone into this. Plenty of inspiration for ours aswel lol.

Sounds like i better crack on takin the windows out then shall i?

Our Sparco seat rails and Scorpion cat back exhaust turned up today, so after saying i wouldn't i couldn't help myself and i assembled the seats, :rasp: Since there is going to be 3 of us driving the car we have got an ajustable drivers rail, but just a fixed passengers. The exhaust will have...

888's arrived today, cheers jay. Headlights also arrived :) just need the seat runners to turn up now

Sweet, think this could be the favoured option then boys

Really like the 1.2's in black mate, looks like you made a good job of takin out that icv lol.