Search results

Hi guys, Anyone here have any tricks for adjusting the camber on a slotted top hole coilover? Is it a case of measure camber, moan at how off it is, lift car, adjust, let settle/drive, remeasure, readjust etc... Until happy? Or can you set them once jacked using one of these...

Hi guys, Following on from this: http://www.cliosport.net/forum/showthread.php?597858-Crank-pulley-auxilary-belt&p=9475662#post9475662 I'm still after a 6rib pulley for my 1.2. After some more searching I think that the 1.5d mk2 has a keywayed pulley, which is 6 rib. Can anyone in the know...

We'll after much fun. I've got the majority of the ball joint off. All except the pinch bolt. I have new bolts in the lot so not worried. I finally removed the nut on the punch bolt. But still can't crack the jaws open. The bolt will not budge. Is the carrier tapped? Or will the bolt just knock...

It wont be to everyones taste on here... It's still very much a work in progress too... After many many boxes, time spent researching and various trials with equipment. I settled on a setup which I was happy to 'destroy' the rear part of my clio for...

Can you change the idle speed of the clio with relative ease? If not, how is the idle speed sensed and controlled? ECU and an idle sensor? Basically I will soon have a pretty big load on my engine, even though it's stationary. I risk stalling my engine, so currently will have to hold my foot...

Ok, Can you swap a crank pulley for a different one (different number of ribs). Or are they not just a bolt on job and are different fitments? Basically I have poverty model 1.2 and it's only got a 3 rib belt (for just the alt). Now I know there's larger sizes out there (6rib maybe?) Can I...

So my clutch has started slipping, so I know I need to get that changed. As it's an engine out job, is it worth getting the cambelt done at the same time to save me some money, cambelt is due... Or would there be very little price difference in having them done separately?

Hi guys, With reference to just the springs, will a 172 rear spring fit on a 1.2? Furthermore, is the 172 spring different to a 1.2 spring? Can it bare more weight and does it make the rear of the car 'sit higher'? Thanks

I need to know if anyone knows the peak voltage of the supply to the locks on the central locking circuit. I dont have a peak hold. So my multimeter just flashes +10 and -10v (locking and unlocking uses +ve and -ve). I'm guessing it's just on a relay and kick out whatever battery v is. Can...

I'm down at oxford right now and my drivers side rear bearing is shagged. My only free day is tomorrow. In kidlington there is a renault dealership, who i will ask tomorrow if they can replace it. How much do I expect to get shafted for this? Anyone know of any good local garages in...

Not the usual question ;). Anyone know much about the working of these? I mean i know they're a mini yellow iso connector. However what system does it run on? Is it just a series of switches (my suspicion is it isn't), which it just joins or breaks to send a signal. Or is it I-Bus? Or...

Sounds like a wierd request, but i need pics of the dash as a whole and pics with emphasis on the tweeter location with relation to the A pillar. I need to see just how far forward the tweeter wholes are of the bottom of the a pillar. Anyone care to take pics for me, who's away from the...

Ok i have had a new set of brake shoes put on. I noticed a bit of noise, but after only driving for about an hour i have put lowering springs on. They have bedded nicely into the rubber surrounds and sit squarely. However i have since noticed a noise coming from the rear left hand side of the...

Ok really random one for you guys, but does anyone know the volume of the clio without anything in the back, no plastics just bare metal. From the back of the B pillars right to the boot? I assume it'll be about 500L.

Ok does anyone KNOW, thats know, not i think or not 100% sure.... If lowering springs from a MK2 non RS's 1.2 16v/1.4 etc..... will fit a 1.2 8v??? MK2 PH2 1.2 8v. I'm sure someone has tried it..... (i know the rears will)

Ok, i need to know the largest size box that will fit into the back on the clio through the hatch, with the rear seats removed. So can someone measure for me: 1. Middle of b pillar (adjustable seatbelt thing) parralel to the most narrow part of the boot (closest the front) 2. The most narrow...

Any tips on removing this and re-installing it? Haynes manual says leave it to the pro's. Can it really be that hard? I want to sound deaden my roof, i hear that it's bonded to the roof at the rear of the car. Do i need any special glue to reinstall it, or will the old stuff suffice? The glue...

I assume from search that this could be due to the TDC sensor? How do i find that in my 1.2 8v? Is it worth a clean or just replace it? If replace where can i get the spare? I assume it's not too difficult to change, bare in mind i can fit inside the engine bay nearly :rasp: Battery is fine...

Mechanically speaking, will a 1.4 altenator fit DIRECTLY onto a 1.2 engine. Yes or no...

Ok, here's the deal. I need some rear tints, ideally enough to stop visibility inside at night from about half a meter away. I have a fair bit of kit in the back of my car now, so want it none visible. However on a red car real dark tints look gash. So can someone send me pics to help me decide...

Ok, never really cared for paintwork, but following this incident.http://www.cliosport.net/forum/showthread.php?t=383369 I thought as i have new paint to work on i should do my utmost for it. So i waited over a month for the new paint to cure properly, then went and got some 3 step meg stuff...

Is it simply Nm times 10??? If not, whats the conversion. Thanks

My one rear seatbelt is around the incorrect way.I'm bloody sure it is. Is this possible? Can you put the rear left seatbelt onto the right side? As it has just a single 180degree twist in it. Do they fit one to the other as in left will fit right and right fit left?

May sound like a mad one. But lowered and on steelies please....... I'm liking the ideas at the mo, TBH!

Ok. I've been removing trims from the clio. As taxi drivers are d1cks - See here! Rear and sides done. Just need to now how to remove the front middle one? With the number plate? And how can i stay within the law with reference to this front plate? Shall i just strap it onto the middle of the...

Ok. Will an alt of the K9K engine (diesel) fit onto the D7F engine (1.2 petrol), without bracketry modification? Yes or no?

Ok lets start from scratch. A taxi driver came around a few nights ago and said "where's your son". don't worry it wasn't me they were refering about. It was one of my chavvy sisters mates. He had taken a taxi to kingswinford (about a £5 journey) and done a runner! As you can imagine the taxi...

Just to help the honest guys out! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270311719444&ru=http%3A%2F%2Fshop.ebay.co.uk%3A80%2F%3F_from%3DR40%26_trksid%3Dm38%26_nkw%3D270311719444%26_fvi%3D1 Hope it's not a repost.

Last night, some time like 9:00pm. Me and mate of mine, who has a clio, may have actually man pissed ourselves! Sexy!

2 Days on the trot seen you now, by the roadworks on enville street. You going wollaston bound, me going stourbridge bound. 7:50ish both days ftw!