White clio 1.2

[BoatNonce]

NO, don't plastidip them in a bright colour, they look best when they're subtle.

 

[ChrisP_182]

i really like it mate, i'd leave the wheels as they are now

 

[Chris_Beer]

A Cup / Skoda Splitter
Smoothed colour coded bullets
Painted door handles, the Cup Spoiler, sort boot holes and rear bumper
Lower it plenty
Refit Narrow plate


Would really set the car off, the wheels look spot on bar the arch gap!

 

[deanogee7]

the plans i've got for the winter is:

colour code the spoiler & door handles, maybe even the bullets.
sort out the clio badge
i NEED to spray the front bumper, wings and side skirts as the dick who did it, never primed or sanded them therefore peeling!
I would also like to camber the back wheels, 2 degrees maybe and lower it more to pull off the wheels.

any advice would be great cheers!

 

[alexr19]

Looks awesome as is. What size are the wheels?

 

[Chris_Beer]

My advice is swap the wheels for some nice Turini's in my garage

Cheers now

 

[bennettxo]

Wow! awesome looking car! really like that! looks like a cup!

 

[deanogee7]

Looks awesome as is. What size are the wheels?

there 16's mate

 

[beastinsheepclothing]

the plans i've got for the winter is:

colour code the spoiler & door handles, maybe even the bullets.
sort out the clio badge
i NEED to spray the front bumper, wings and side skirts as the dick who did it, never primed or sanded them therefore peeling!
I would also like to camber the back wheels, 2 degrees maybe and lower it more to pull off the wheels.

any advice would be great cheers!

Love mk2's in white my mate got a white ph1 172 they just look like little beast's but lovin what u doin mate im doin similiar but with a ph1. As for camber shims i bought some from a company near me and there spot on any degree u ask for and they got em on fleabay aswell....http://www.ebay.co.uk/itm/321231940402?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648....carry on with the build it looks dope

 

[LaurenTayla33]

I nearly bought this bloody thing!
So cool

 

[deanogee7]

Update - January 2014!

Got my Flat wipers on the front,
Been waiting to spray my bumper, side skirts, wings and spoiler for a long time now, finally got it done!
The car went in to the sprayers on monday and came out friday, awesome job.

The car failed its mot as the stupid airbag and service light is STILL on, its a pain in the arse!

Monday is when it goes in and hopefully ill clean and polish it before going to uni!

so the updates were:

- 3M'd the front lights
- aerowipers
- colour coded spoiler and door handles
- Mirror black roof
- Front bumper, Sideskirts and Wings resprayed
- Top and bottom grills sprayed and fog light covers sprayed gloss black

slow progress to come!
P.S Sorry about the bad pictures!

 

[Knuckles]

Looks ace, the wheels would look brilliant the same colour as the diamonds

 

[rich-k-]

this looks so much better! wheels are a perfect choice

 

[deanogee7]

had these pictures a while now, all washed and clean!

IMG_1043 by deanogee69, on Flickr

IMG_1045 by deanogee69, on Flickr

IMG_1048 by deanogee69, on Flickr

IMG_1050 by deanogee69, on Flickr

IMG_1052 by deanogee69, on Flickr

 

[deanogee7]

UPDATE JUNE '14

- Have bought 1.0 degree camber shims for the back wheels, should be here friday
- Skoda splitter

Also… i need some advice, IF i was to buy these coilovers, would there be any problems with the camber shims etc?
http://www.kamracing.co.uk/car-tuni...-hole-pitches-58-mm-ta-technix-coilovers.html

 

[Darius]

Love this

 

[-Danman-]

UPDATE JUNE '14

- Have bought 1.0 degree camber shims for the back wheels, should be here friday
- Skoda splitter

Also… i need some advice, IF i was to buy these coilovers, would there be any problems with the camber shims etc?
http://www.kamracing.co.uk/car-tuni...-hole-pitches-58-mm-ta-technix-coilovers.html

Wow you've made loads of progress since I last looked at your thread! I love the look of the car now!

I used to to have those coilovers on my old 1.6. They're a bit crashy but for the money the can make the car look so much better! Don't see why you'd have a problem with those camber shims tbh.

Also, now you've got a Skoda splitter, does it mean your old one is up for sale?

P.S. Those wheels are awesome! I was looking for those before I found the Rota Grid Drifts.

 

[deanogee7]

Wow you've made loads of progress since I last looked at your thread! I love the look of the car now!

I used to to have those coilovers on my old 1.6. They're a bit crashy but for the money the can make the car look so much better! Don't see why you'd have a problem with those camber shims tbh.

Also, now you've got a Skoda splitter, does it mean your old one is up for sale?

P.S. Those wheels are awesome! I was looking for those before I found the Rota Grid Drifts.

thankyou mate, gonna be horrible when i come to sell it!

how far do the coils go? you reckon they are worth it?

haha, yeah ill let you know about it when its actually here!

 

[Dannyeff]

Nice looking Clio well done!

 

[-Danman-]

thankyou mate, gonna be horrible when i come to sell it!

how far do the coils go? you reckon they are worth it?

haha, yeah ill let you know about it when its actually here!

Yeah I'm glad I put them on mine. I had it lowered 60mm front and 55mm on the back. The fronts could go down a bit more but I think that was the max on the rear. The wheels are 15" in this photo.

 

[Loz H]

Mega love for this!

 

[CoryColeWilkins]

I love what this car has turned into!

 

[deanogee7]

Yeah I'm glad I put them on mine. I had it lowered 60mm front and 55mm on the back. The fronts could go down a bit more but I think that was the max on the rear. The wheels are 15" in this photo.

I have got 60mm springs all round, but i need it lower all around to pull of the wheels as they are 16"

 

[Paul.M]

Wow lovely looking motor matey, good luck with the future plans!

 

[Willsam]

I'm running those coilovers at the moment mate, like dan said they are a bit crashy, front end is quite bouncy but you get used to it after a while, my splitter hits the floor a lot where I live, isn't far off the floor and there's quite a bit of thread on the coilovers to go a bit lower, the back end on just the springs no adjusters sits just above the rear wheels.

Car looks amazing though mate, love what you've done to it.

 

[JAParker]

did you go too liverpool uni? there used too be a white 172 rep around

 

[deanogee7]

did you go too liverpool uni? there used too be a white 172 rep around

yeah mate i go jmu and yeah i moved back to manchester about a month ago now

 

[deanogee7]

I'm running those coilovers at the moment mate, like dan said they are a bit crashy, front end is quite bouncy but you get used to it after a while, my splitter hits the floor a lot where I live, isn't far off the floor and there's quite a bit of thread on the coilovers to go a bit lower, the back end on just the springs no adjusters sits just above the rear wheels.

Car looks amazing though mate, love what you've done to it.

ahh okay mate, i don't know whether to go for them coils or ones on the ktec website which are a bit more expensive. My spine is used to all of the smashing around with the springs now, so i should be okay with it haha, thanks!

 

[deanogee7]

UPDATE JUNE 2014

Fabia splitter & camber shims have arrived! hopefully get the splitter on today and get a picture!

Untitled by deanogee69, on Flickr

Untitled by deanogee69, on Flickr

Untitled by deanogee69, on Flickr

 

[deanogee7]

Fitted the fabia splitter, looks much better and cleaner imo
sorry for the bad pictures btw!

Untitled by deanogee69, on Flickr

Untitled by deanogee69, on Flickr

Untitled by deanogee69, on Flickr

Untitled by deanogee69, on Flickr

 

[GregJonesx]

What are the specs of the wheels?

Im after a set of rotas for mine and wondering what's needed to make them fit?

Epic car btw

 

[Willsam]

Where did you get your camber shims from bud? Looking for a set.

 

[bennettxo]

Where did you get your camber shims from bud? Looking for a set.

There's a set on eBay and they're 15mm spacers too with the bolts,£45.99

Edit:scrap that just looked they're no longer on there!

 

[Willsam]

There's a set on eBay and they're 15mm spacers too with the bolts,£45.99

Edit:scrap that just looked they're no longer on there!

damn, bad timing then, will have to keep my eye out, cheers though bud.

 

[deanogee7]

UPDATE: JULY 2014

Just a couple of small adjustments, going to an exhaust place to get my decat and slightly bigger tail pipes, should look much better

First update is the rear numberplate light holder, old one was an absolute state! so brand new one looks much better
before

Untitled by deanogee69, on Flickr

Untitled by deanogee69, on Flickr

After

Untitled by deanogee69, on Flickr

Gave it a quick clean after being on holiday

Untitled by deanogee69, on Flickr

Next mods
- coilovers orrrr air (not sure yet)
- fit the camber shims on back wheels
- paint the front and rear callipers

 

[Pkdeath91]

Looks absolute beautiful wish i cud spray my iceberg 172 white

 

[deanogee7]

UPDATE - AUGUST 2014

Decided to plastidip my wheels red, looks a weird colour with the previous grey showing through

This was the first coat of paint

Untitled by deanogee69, on Flickr

After two coats of paint

by deanogee69, on Flickr

After the 4 coats of paint, looks good from a far

by deanogee69, on Flickr

Then i got some pictures with my mates ST

by deanogee69, on Flickr

by deanogee69, on Flickr

by deanogee69, on Flickr

Thanks for looking!

Need to get my camber shims fitted then hopefully buy some coils this week and fit them next week!

 

[cat171]

It seems very weird to leave the wheels on the car! You didn't even cover over the tyres.

 

[deanogee7]

It seems very weird to leave the wheels on the car! You didn't even cover over the tyres.

haha iknow mate, its easier than taking the wheels off the car, it just peels straight off the tyre

 

[robhoops]

Looking for good mate, not my cuppa tea of the wheels, but the car looks immense