clio 172
so once again i have a clio 172 ph1 in silver this car has been bought to be tracked, so anyway since picking it up around two weeks ago i have made this progress,
completly stripped the interior out including any unwanted speaker cables and rear wiper cables purley for tidyness not weight reduction.
couple of pics:
how i got it
inside after i stripped it
so after removing all the interior i realised i had nowere for my alarm sensors sooooo:
also i wanted an interior light as i no longer had one due to stripping the head linner so once again thought of something to resolve it
two boot lights wired into the sides of the car (good idea if i dont say so myself)
then a few days past then i decided it was time to tackle the tar
couple more days and i obtained these
also decided the interior would look alot better in satin black
other bits and peaces ive done include putting all the cables in black flexi conduit removing all the cables that were in the center of the car i.e airbag module, the airbag module i moved to under the dash, there was enough space as ive also removed all the airbags. i also shortened all the airbag cables to keep mess to a minimum (i will be putting resistors in all of these).
todays work:
progress today was picking up 4 25mm spacers, ktec solid top mounts and also ktec coilovers.
few pics
old suspension removed
spacers
and one before they were fitted
phheeww done for now.
things i need to do:
.subframes for seats
.decat
.harnesses
.restore headlight lenses
and much much more.
completly stripped the interior out including any unwanted speaker cables and rear wiper cables purley for tidyness not weight reduction.
couple of pics:
how i got it
inside after i stripped it
so after removing all the interior i realised i had nowere for my alarm sensors sooooo:
also i wanted an interior light as i no longer had one due to stripping the head linner so once again thought of something to resolve it
two boot lights wired into the sides of the car (good idea if i dont say so myself)
then a few days past then i decided it was time to tackle the tar
couple more days and i obtained these
also decided the interior would look alot better in satin black
other bits and peaces ive done include putting all the cables in black flexi conduit removing all the cables that were in the center of the car i.e airbag module, the airbag module i moved to under the dash, there was enough space as ive also removed all the airbags. i also shortened all the airbag cables to keep mess to a minimum (i will be putting resistors in all of these).
todays work:
progress today was picking up 4 25mm spacers, ktec solid top mounts and also ktec coilovers.
few pics
old suspension removed
spacers
and one before they were fitted
phheeww done for now.
things i need to do:
.subframes for seats
.decat
.harnesses
.restore headlight lenses
and much much more.
Last edited: