Search results

Link to MSVT Photography http://www.msvtphotography.com/v/photos/24148hcf/C128429002 Had a little issue on the day with the top camber bolt on nearside shocker not quite being tight enough so there was movement in and out depending on corner, once I'd sussed that and guessed the camber the car...

Just fitted some FK Konigsports coilovers, covered about 50 miles. whilst fitting I made sure that the spring adjusters had the same settings for both sides of the front and rear. Ride height was perfect to start with but on the weekend I noticed that the near side rear had dropped lower than...

Got a blowing exhaust on the section after the manifold, may as well upgrade this part all the way to back box. Having tuoble deciding which bits I need and what they are advertised as, found manifold and de cat and cat back, it already has de cat but do not need the manifold. Standard item in 4...

Hi all, after fitting the cup with Fk konigsports and pure solid top mounts its ready for setting up, any reccomendations for camber, toe etc ???????????????????????????, cheers, Paul

Advice needed please !, I have fitted pure motorsport top mounts with fk konigsport coilovers, but I have two sleeves/ spacers left over, should I be using them or are they not needed with coilovers ? I took the strut nut off the coilovers, leaving just the top spring cap, posted the top of the...

Hi I am after some info regarding the cup stub axles, I recently got some bits together to fit to the car, coilovers and a few other bits, including the stub axle spacers from M.A.D. i think I read a post on here with the same issue, which is.............. When I took the cover of the hub nut...

Anybody got good settings for fk konigsports ? save me getting them completely wrong. height, damping and camber please, obviously people have different preferences, but wont be miles apart.

Taken the OE seats out of the car and fitted some bucket seats, now the dash lights up like a christmas tree lol, had this before on another car and resistors sorted it, I presume this is the same ?? any guides to doing this, which wires in which plugs and resistor size please car is 172 cup.

Can only find these listed as Clio 2.0i 16v sport Bhttp://www.venommotorsport.com/product_details.php?id=17851&manufacturer=FK&category=Suspension do these fit the 172 cup ? do you get the droplinks in the kit too, is anything else required to fit or is it direct swap ? is venom the best place...

Still no further forward finding me a set of trackday coilys at a sensible price, thought I'd settled on B14's but might be a bit soft for me. Can anybody help me out based on experience, which kit ? Do Bilstein B16 pss10's fit a 172 cup ????, might be an option

I know they both use Bilstein dampers but what else is different ? spring rates etc, which would you go for ?

I got hold of a set for trackdays, but they had no centre caps, what make are the wheels and where can I get the centre caps ? is it standard size ? which size? Cheers Paul

I know I'll be opening a can of worms, I have read the posts !, but which coilover should I fit for a Clio 172 Cup just for track use. It currently has Vmaxx coilys on it but they are a bit tired and the previous owner only had them on for aesthetics. I quite like the Spax rsx kits because of...

Looking for a set of trackday tyres, been trawling the threads to find a good deal but has anybody had recent deals I could follow up ? Not really looking for a specific tyre, just one that is good value, 195 or 205 50/15's x 4. Cheers Paul

As title, who sells them, and where from ? cheers Paul

I have a set of 15 inch OZ F1's which are currently being refurbed ready for track use, the tyres which were on them were 195/50/15, but, I have the chance of some Toyo R888's fairly cheap in 205/50/15, my question is would these fit without too much sidewall movement ????, anybody else run that...

Looking for best solution to stop the warning buzzer sounding or light coming on. I am fitting bucket seats and harnesses, what is the best solution. Don't really want to mess around with belts amd clips , is there anyway of bypassing the wiring ??? What have you done ??

Hi All just wondering if there is simple brake upgrade for the 172 cup using possibly other Renault parts and mounting brackets, I have drilled and grooved discs allround but after a few trackdays I cant see them lasting long, and come replacement time I might be looking to upgrade. Cheers

Ok, i have a clio 172 cup on an 03 plate, and a friend has a 172 cup on a 52 plate, he is a mechanic so we decided to change the timing belt, water pump and tensioners yesterday, whilst changing them we noticed that underneath the inlet manifold his one had an oval shaped flute coming from the...

I have just bought a 172 cup for track days, had a fair few renaults to date, first car was Renault 5 gordini, and had 5gtt's, 19 16v's and 1.8 clio valvers, then bought a uk scooby, then a P1 with 400bhp, now sold. Looking to use the cup for trackday entertainment and off to the ring in September.