Search results

Protect a sticker? :S

300bhp is definitely achievable n/a, i recently sold my k24 ep3 which was about 240-250bhp with an oem build, with a bit more money you could get close to 300 before even looking into ITB's with a 2.4, although as said this guys just bought over toda basically!

electrical fault which causes limp mode no? hence no revving?

the 'heartbeat' symbol is limp mode, wont let you go past 3000rpm iirc. ive pm'd you about the throttle body which should cure this problem

Kwik fit do it for 30 bucks, part from that not really.

pre cat-sensor knackered or your throttle body is goosed (i have one for sale) if you need it

Pre cat sensor (lambda sensor) or a throttle body issue Sensors are about £70 from a mtor factors

When mines was cunted it didt bring on the eml

simples....oil light on at any time...check the oil..if it keeps happening change the oil...

That aint a o2 sensor, your 2 lambda sensors are underneath the car on your catalytic convertor, someone else may confirm what that is but it will be that if its snapped off!

"probably" a pre lambda sensor

Yeh that was next on my list! Cheers

I justchanged my pre cat sensor over and drove 3 miles revved the car a bit and it cut out. Back to the drawing board

Nope! I had te heartbeat light on my dash when i went and got a diagnostics check done stopped and started the car and the fault was gone! Im changig my sensor tommorrow nite sowill report bk!

Its happened quite alot recently. Ive changed my coilpack and it wasnt that, and now im goig to change the pre cat sensor

Im having this issue aswell! Keep me updated on your progess

LOL cheers mate will give that a bash

spot on! thanks! Will that cure the cutting out etc? or just the revving?

plugged got changed last summer and ive done 6000miles with them...leads "look" ok but might change them anyway!

mpg is normal. 1000miles and ive got 32.8 which for me is good. and temp guage reads normal aswell! im stuck for answers and so it my mechanic

ok my bad didnt no that about the 182! No fault codes when i got my mate in kwik fit to put his fault code reader on it! i just want it fixed as its very annoying! On another note, a few times recently when the cars been warm and ive gave it some beans and then coasted the car cuts out, it...

From cold my car stutters back down to idle. if i rev the car to 3000rpm then press the clutch in (coast) it goes down in stages. Bounces if you like. i changed the coil pack on advice from my mechanic at the weekend but this hasnt helped, i cleaned the throttle body out with brake cleaner and...

will a boss kit from a ph1 172 fit my 182? cheers

Will try them out tommorrow! Cheers

Basically when i go over a bump the car steers itself ( inner tie rods? ) and i seem to have to turn the steering wheel more to take a bend that what i used to and the steering itself has gone numb. now im no mechanic but i can jack up a car and wiggle things about for play just wondering if...

bascially when i go round a corner near full lock and hit a bump the front suspension on my 182 makes a bang and sounds like its falling to bits! i ve had a look and cant see anything wrong just wondering if anybody else has had these issues and how they solved them! cheers

Cheers guys. The cars going away for winter next week, so I'm gonna strip out the throttle body and grease it up!

in the last 1000 miles my clio 182 has stalled when coasting up to junctions at low speeds, the revs drop as they should when i press the clutch in but then they dip to 300 ans the engine stalls. only does it sometimes and other times its fine. i was thinking starter motor or idle control...

i bought the parts, he fitted them. had it on the rolling road and the guy said the car was running mint no problems at all, made 177bhp and 146lb/ft of torque

well spent 2 and half hours washing the car and polishing to get it ready for all the winter elements. it consisted of a hose down - 2 washes using the auto glym shampoo and the 2 bucket methind. -fully tar removed the whole car -a further 2 washes using a clean mitt and the same method as...