Search results

my friends f7r megane with itbs doenst start properly or not start, we have two ecus and the problem is still the same(ms2 and aem ems 4) the wiring is ok timing is ok , finaly we have fitted aem ems 4, after a few starts its again the same thinking that the crank position sensors...

there is a little play in my left driveshaft the car is ph1 172, i dont want to recondition it. is there any compatible ones i mean 1.6 1.2 or ph2 172, 182. if i can use different ones i am going to search because finding ph1 ones are difficult and there are expensive here someone says you can...

here is a project about my old throttle body it was bad in idle and sticky. previously i fixed it and polished it also ported inside of it the last job is disassemble it machine the whole throttle body and make a larger flap the tb is ready to use i will polish it in a few days like a mirror

last week i have fitted my hr's the car is as low as like eibach sportlines for now i guess it will lower 4-5 cm more after i fitted them i recognize a vibration at 80-90 km/h but after 110 it goes away. before i used konis with eibach springs and there wasnt anything like this is there a...

yesterday we make this mod to my friends 182 all entries matched with gaskets the lower inlet has matched and polished totaly not only the entries but also inside of it upper one we made it approx 10-12 cm inside tb is also ported and polished taking of the parts are esay but refiting the...

firstly ported them, increased the diameter and take off the curves inside them finaly polished them you can see the difference with oem ones

this is the second LY car in Turkey the other one is a clio 182

i am going to fit a short shifter but couldnt get out the old one i dont want to harm it i heated it but it doesnt is it screwed or only glued waht method should i have to use ?

the car is also mapped what is your opinions? i think there is a power loss also anybody knows the appox. values in rs tuner pa for a standart megane 225

for a while i have a steering rack issue. we found that thereis clearence in the pinion shaft in it. under the rack there is a bolt sometimes i tighten the bolt and the clearence goes a little while the steering become a little hard but its time to change the rack some mechanics fix the rack by...

Pillars and gaiter is ownmade the next step is dashboard

normaly i use 17" wheel but last week i started to sanding my oem oz wheels and for a 5 day hard work painted them to speedline colour "renault 205110" the sanding process is very hard but the painting is much more easy i used 150g gray primer coat (1 coat) 400g renault 205110 (3 coats) 300g...

for a while i have a problem, the car turns but dont start in the first 2-3 attemps but if a give a little throttle it starts. for about 4-5 seconds the idle is very low and the sound of the engine is different but after that everything will be normal it makes it always when the engine is cold i...

with 3 person (270 kg in addition) http://www.youtube.com/watch?v=iy67P5zDduc iy67P5zDduc

firstifull we took the mold of the oem caps and apply a chemical not to harm the paint of the caps inner and outer molds ready to make it conclusion

firstly we took of th current paint after that started to sanding the wheels bought 2 center caps here is the primer coat bought 500g renault 205.110 antrhacite and standox laquer basecoat topcoat painting the...

when i push the cc button i found that speed limiter works but i cant give any speed to cruise control and it doesnt engages what can it be the reason of it? fuse or etc.? thanks for any help

i have a superchips remap with max 8300rpm also have kentcams camshafts 258/260 while on full load i recognize that the the revving is very slow after 7500-7600 esspecially at the end of 3rd and 4th gear but no problem on 1 and 2 if i continue reving after 7600 to 8200 i loose time but if i...

for a while i had a missfire 3 days ago i recieved ny new ht leads which i bought from performancelads. i fit them and found that 2 of my spark plugs were not tightened much take them of and also cleaned them. for not my problem seems to be sorted the car goes much more better esspecially on low...

AP, BM and YLT RS's are much more better with this system we used 60mm stainless pipe mine is 34ap914 i had a small mid and take of everyting fit a straight pipe from headers to back box (supersprint) the sound increases %25 and the car is more efficient Serkan's 34bm757 also fit a...

for a while i have a missfire problem on my car esspecially on low rpms i found that the ht leads were gone and bought a set from uk. i will recive them next week but last 2 months there are different sympthoms like when the car is very cold it dont start for the first attemp but the second or...

in Turkey the roads are not very good everywhere for an sport car i am driving my car for 1 year on hard adjustment and 3cm koni springs last week i adjust them the the softest and i recognize that it is much more confortable than i guess also the handling is much more better i understand that...

17" wheels 205 40 17 yokohama tyres new and painted bullets and side strips own made ph-quick stickers black coloured headlights ph2 rear lights

also cleaned uder the car and wheels

we bought it last weekto my friend i think there isint 10 182s in turkey and one them is this car we like it so much it is at 25k and not driven for about 1year it has additional koni adjustable absorbers and springs and dark black window tints and bonus...

we have purchased aclio 182 last week to my friend the car is at 25k and not driven for almost 1 year. we want to change the exhaust system but i thing the cat is problem. because the cathave 2 o2 sensrors before and after it does it make a redig problem if we take of the cat and apply a...

we have painted the inside of the headlights to black and also fit 2 xenon kits to headlights and fog lights also take off the hats inside the foglights to get more light finaly the fog lights gives twice of the headligths;)