SQ5
Fixed the misfire with a new injector
Started my car after a couple weeks to go to body shop to get boot painted, it's acquired a misfire.
Fixed the misfire with a new injector
Today I looked at it and thought, ''I have a few jobs I need to do here. It's cold. NAH!''
If only it were that simple! All the drains are clear! Running out of ideas tbh.If you search the forum for leaks /blocked drains etc you might find your solution. That sounds like the drain in the middle of the bulkhead is blocked, there's one under the scuttle panel at bottom of windscreen that blocks easily too.
No doubt one of those is the source of your leak mate [emoji106] good luck
Ah.. Damn.If only it were that simple! All the drains are clear! Running out of ideas tbh.
What symptoms did you have?Fixed the misfire with a new injector
I shall check the arch liner next week. Thanks.Ah.. Damn.
You done the sill drains and behind front arch liner? Behind arch liner caked with silt /mud then water comes into footwell
I shall check the arch liner next week. Thanks.
No way 😧
Cleaned it in the snow ready for its new owner [emoji20] [emoji20] [emoji20] Will miss my Clio badly
Cleaned it in the snow ready for its new owner [emoji20] [emoji20] [emoji20] Will miss my Clio badly
I know mate.... Gutted tbfRare car now dan
Shame to see it sold
But a mk2 focus rs is lovely
Please say in blue with the alcantara seats not those peasant coloured seats.....
I know mate.... Gutted tbf
Buying with my heart I'd want a mk2 focus rs or a civic fd2..... I'll probably buy with my boring/sensible head and buy a fiesta st3! In talks with detail Chris on here about buying his fiesta off him
Fixed this on my one before I got rid.If only it were that simple! All the drains are clear! Running out of ideas tbh.
Piece of pissHow easy is the dogbone mount to do, obviously it's only a couple of bolts, but is there much movement in the engine when you remove the old mount?
Was it easy to do?Fitted a new engine mount with the powerflex insert. Feels like a different car now, the old one was completely shot!
Was it easy to do?
Quite easy to do mate. Get the car jacked right up, remove under tray, removed old dogbone fit new one!How easy is the dogbone mount to do, obviously it's only a couple of bolts, but is there much movement in the engine when you remove the old mount?
Finally took the wipers, scuttle and washer bottle off and this was the problem. The washer tube passes through the bulkhead and has a sleeved grommet that had been pushed through, letting water through. All fixed now and no more leaks! Thanks @welshnameFixed this on my one before I got rid.
Drains were all clear etc. On the passenger side under the their washer bottle is a load of wiring that's fixed down, there is also the hose for the rear washer jet. It's there that was leaking on mine, took an absolute age to find! Doesn't look anything when you see it but pour water directly onto that area with the carpets pulled up inside and you'll see it pouring in.