Show us your track cars!

[imprezaworks]

want

 

[FAST_aD13]

Heres mine - E36 325i

Bought it last year as a cheap track tool and so far hasn't disappointed (previous owner's interesting paint job aside!)

Spec:
FK Highsport Coilovers
Front Strut Brace
Pipercross cone Filter
ECU Chip
Manifold back SS straight through exhaust
Fully Stripped
Harnesses + Recaro's
M3 Staggered wheels

 

[imprezaworks]

Odd colour, I like it tbf.

 

[S_E_A_N]

Looks purposefull! I also like the colour strangly lol. Thats the track car id have e36 if i could stop buying french tat.

 

[Jonnio]

Cheers mate :approve:

Bought a massive roll of vinyl and cut them all out myself...took forever lol! was going to wrap the whole car but gave up after a few bits and just went for something completely different and unique. As stupid as it sounds I used placemats of varying sizes to mark them out and then used a craft knife on them.

As random as that is it looks awesome lol!

 

[shell-vt]

my old one who has her now???
[/UR

[URL=http://s1095.photobucket.com/user/shell-vt/media/IMG_0810.jpg.html][/

 

[...]

View attachment 108177View attachment 108178 View attachment 108179View attachment 108180View attachment 108181View attachment 108182

 

[sonny172cup]

Interesting Brake discs

 

[...]

Interesting Brake discs

custom 8mm thick lightweight discs on ali bells , unsprung weight reduction ,

car is only 530kgs

 

[sonny172cup]

Nice, does it increase pad wear?

 

[...]

Proberbly yes and i ran viscious sintered pads and you had to clean wheels at the end of the day else they would get screwed as the build up from pads was awful

 

[S_E_A_N]

Cheers mate :approve:

Bought a massive roll of vinyl and cut them all out myself...took forever lol! was going to wrap the whole car but gave up after a few bits and just went for something completely different and unique. As stupid as it sounds I used placemats of varying sizes to mark them out and then used a craft knife on them.

Roughly how many meters of vinyl did you need to do something like that mate?

 

[Beaniemoo]

My MK1 track car still going strong after something like 4 years of work

Donnington

Cadwell

Stripped interior with shortened dash and Stack dash

Forged, cammed, ITB'b F4R

Lap of Cadwell (with bad sound)

 

[MicKPM]

The Mk1's look sexual in White - Well presented that Beanie #ThumbsUp

 

[vstodorov]

 

[CallyTeee]

up at Knockhill on January the 26th

 

[sonny172cup]

Now thats what I call a bonnet vent

 

[vstodorov]

The engine wants to breathe....

 

[Patrickobrien]

My track car

 

[BustaMOVEs]

View attachment 108177View attachment 108178 View attachment 108179View attachment 108180View attachment 108181View attachment 108182

What engine are you running in that?

 

[...]

What engine are you running in that?

2.0 zetec Built by Dunnel Race engines

basically the car spec is Below, Cage and chassis mods developed with Me and Phil at Caged , all the carbon work done by P&T who were basically the Tyrell F1 body shop back in the day, some really nice bits of welding done by the boys @ Mclaren (f1 not road cars and the welding work is just stunning).
Pretty much all of it is bespoke specced and developed by me over a period of 10 years, as you will find if you look at the fluke motorsport site that my car is all over their pictures as we developed the carbon , the discs and bells for the brake kit etc.

I had alot of support from various suppliers who developed stuff with my input and testing to get to a finished solid car.

Its about 420bhp per ton and very useable , was driven by me , my wife ,and anyone who fancied having a go from total track virgins to accomplished pro drivers, and it would do mile after mile at trackdays without missing a beat.

It has done every track in the uk multiple times and most of the big tracks in europe ,

If someone asked me to build one to the same spec tomorrow it would cost you £40k in parts alone , there is about 8 to 9 k just in carbon on the car , makes it beautifully stiff as it was all bonded and rivited and then the cage stiffened it some more .

Chassis:	1995 Westfield SEi wide highly modfied with extra bracing. Full FIA spec T45 rollcage by Caged.
Bodywork:	Westfield lightweight race tub, bonnet and nosecone. Fluke Motorsport body pack - panelling, carbon/kevlar sidescreens,aeroscreen, wings, floor. Painted BMW Mini Indie Blue by P&T Byfleet
Engine:	Dunnell 2.0 Zetec, Crossle race spec on Webber 45 carbs with Dunnel water rail. Brise Alternator, Brise Starter motor, Radtec 4 core aluminium radiator, Mocal 16 row oil cooler, Mocal remote filter setup, Think Automotive swaged ends on aeroquip hosing, Red top 40 gel battery
Transmission:	BGH close ratio Pro gearbox, Quaife Caterham quickshift, Dunnel heavy duty race clutch cover and plate, Sierra 4x4 3.9 LSD
Interior:	Fluke Motorsport interior pack - carbon-fibre panelled 2mm pre-preg floor, carbon-fibre interior panelling in 1mm pre-preg (riveted and bonded by P&T Byfleet), carbon-fibre pre-preg dashboard, carbon-fibre pre-preg and aluminium honeycomb boot cover, carbon-fibre sill protectors, carbon-fibre chassis rail protectors, carbon/kevlar lightweight high back race seats, Duralit switchgear, FIA cutout switch, Luke 3" 6 point harnesses, Racetec capillary gauges, Westfield led fuel gauge, VDO 10,000rpm tacho and ODO.
Suspension:	Westfield aero section front widetrack wishbones, Avo 1.9 ID dampers, modified Westfield anti-roll bar kit (front and rear), rear, Westfield rear wishbones modified for ARB pickup.
Braking:	Fluke motorsport 260mm lightweight discs and bell kit, Westfield aluminium hubs, Wilwood Powerlite 4 pot calipers with Polymatrix A race pads, Castrol SRF fluid, Standard escort Mk3 discs and Mintex 1155 pads in Sierra caliper on the rear.
Wheels:	Minator 6j and 7j x13 with Yokohama 048r tyres Minator 6j and 7j x13 with Avon race wets Compomotive ML 6j and 8j x13 Avon FF zetec slicks.
Performance:	Total weight, 535kg. Total power, 225bhp.

 

[BustaMOVEs]

Think I've seen this on nutz? Did you post a vid on there? I thought it was a calibra 2.0 16v engine, but that may of been someone else as to the reason I asked.

 

[...]

Think I've seen this on nutz? Did you post a vid on there? I thought it was a calibra 2.0 16v engine, but that may of been someone else as to the reason I asked.

Its been around for a long time , its actually not in my possession now as i sold it a while ago and is owned by a guy up north and isn't really used any more but tucked up in his garage as i think he works offshore .

 

[AdamR]

Think I've seen this on nutz? Did you post a vid on there? I thought it was a calibra 2.0 16v engine, but that may of been someone else as to the reason I asked.

Think that's my one... Harv's was much more pimp, haha.

 

[...]

Think that's my one... Harv's was much more pimp, haha.

Not sure it was pimp , everything was done for a performance reason.
I guess having it sprayed was pimping it .

 

[BustaMOVEs]

Think that's my one... Harv's was much more pimp, haha.

Ah yes, now I remember the name, yours is a beast, love it

 

[jim cook]

Great thread ,some cool pics . Sideways trophy at Quarry is a great shot

 

[jay70]

 

[neil a]

Couple of mine in new spec

 

[Jekyll]

How comes your harnesses aren't mounted to the harness bar?

 

[jay70]

How comes your harnesses aren't mounted to the harness bar?

They will be when i get round to carpeting the car, plus i want to change the harness buckle for one without the hole in it.

 

[Jekyll]

I was curious thats all. Car looks great in the 3rd pic :race:

 

[Grant89]

As random as that is it looks awesome lol!

Haha thanks, random evening in the garage before a 'Ring trip 2 years ago! Was quite successful I feel

Roughly how many meters of vinyl did you need to do something like that mate?

I'll work out what I've got left at home and let you know, I bought 10m x 1.5m worth and don't think i even used a third of it but I'll double check for you mate.

 

[mgd]

Few of mine

 

[Jekyll]

^ Some nice pics there and car looks great

Any info on spec?

 

[mgd]

^ Some nice pics there and car looks great

Any info on spec?

cheers, it's a great little car for relatively cheap fun

its a 2002 Clio 172
ktr induction kit
ktr exhaust
rs tuner
full bolt in cage
Seats and harnesses
cheap coilovers
ph1 oz f1's with AD08r's


puts out 179bhp

few pics here

 

[Narf]

What cage is that?

 

[Martin.]

That looks lovely mgd

 

[dweezle]

Fun Little Undies change moment last week.




Not much of a Track car, as i run it in Supersprints Stock Class.
So basically straight out of the factory.

 

[NorthloopCup]

Fun Little Undies change moment last week.




Not much of a Track car, as i run it in Supersprints Stock Class.
So basically straight out of the factory.

Lol! Good effort!