ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Nick172Cup’s 2nd 172 ’TrackCup’ Project/Build.



Sounds sensible mate. If you did want to do a trackday in a clio, you know you're welcome to drive mine when it's healthy again anyway.

If you end up breaking it, PM about the engine old boy. GLWTS.

What all rounders you looking at?

It could well be another clio, but standard. Other options are...

E46 330i Coupe
Mk5 Golf GTI
Audi TT 1.8T
Audi A3 1.8T

Pretty much something i'm not going to look like a c**t driving miles in, as a caged clio as even a temp daily is embarrasing.
 

withoutabix

ClioSport Club Member
Gutted nick seems and shame to break this car was epic at llandow!

keep me informed regarding the cage! could be interested altho I imagine you have a list of people after it as long as your arm
 
Right, specs... Current car spec -

Engine -

ITG Air filter with 45 degree bend.
Stealth exhaust
Decat

Suspension

Bistein B14's
PMS Top Mount and Strut Brace Kit
PMS Rear beam Bearing Kit

Interior

Saftey Devices 6 Point Roll Cage with Doorbars
OMP steering wheel with OMP adjustable boss kit
OMP Seat Subframes
Cobra Sidemounts
Sabelt Cup Racer Wraparound Seat
Sparco ‘Circuit’ Wraparound Seat
OMP 6 point harness (red)
Spare OMP 4 point harness and passenger seat subframe (red)
Odyssey PC680 lightweight Dry Cell battery with cut off switch on passenger side floor

Wheels and Brakes

OZ F1's with Toyo T1-R's
Brembo HC Front with EBC Bluestuff Pads

Now, heres all the other parts I have tucked away...

AST Sportline 2’s.
Quaife Gearbox
4x 195/50/15 R888's with 3-3.5mm tread
GRP Bootlid and Bonnet
FEV 2.25L Plumbed in fire extinguisher
2L oil catch tank
2 further sets of OZ F1’s
25mm front spacers (Done)
15mm rear hub spacers
2x sets of lockable aerocatches (using same key)
1x set of non-lockable aerocatches
Pair of one degree camber shims
Pair of half a degree camber shims

So there you are. If you want the whole lot fitting and making 'race ready' (sort cut-off switch and AMB Transponder), price will be between £6,500 - £7,500 roughly. Shall confirm final amount in the next couple of days.

Any questions dont hesistate to PM me.

Cheers
Nick
 
  Clio 172
Sorry to hear about this Nick, seems to be a theme at present. If you do break it though I'd be interested in the induction kit and the top mounts and strut brace;)
 
Last edited:
  XC90, 330d, Trophy’s
Nick, just been tipped off about this, so I've fired a text over to you.
a few bits I'd like if possible please, I can nip over anytime and pick them up.... All goes to the Trophy project buddy ;)
 
  172 Cup & K20 Ph1
Hi Nick,

Really sorry to read this... however, I'd really like the wiring that you've put in for the battery, will save me a lot of time. Fire me a PM if you don't get the opportunity to sell as a whole, would also be very interested in the bonnet/bootlid.

Thanks
Rhys
 
Right prices for the parts that arent on the car...

AST Sportline 2’s - £1200 Collected
Quaife Gearbox - £1000 Collected
4x 195/50/15 R888's with 3-3.5mm tread - £300 Collected
GRP Bootlid and Bonnet - £120 per panel or £200 for both Collected
Whiteline rear ARB - £140 Collected
FEV 2.25L Plumbed in fire extinguisher - £100 Collected
2L oil catch tank - £30 Collected
2 further sets of OZ F1’s - £150 per set
25mm front spacers - £70 Collected
15mm rear hub spacers -£30 Posted
2x sets of lockable aerocatches (using same key) - £80 Collected
1x set of non-lockable aerocatches - Free if you buy the above sets.
Pair of one degree camber shims - £30 Posted
Pair of half a degree camber shims - £30 Posted

Car is for sale also with the spec listed on the last page at £3,000.

Cheers
Nick
 


Top