exhaust

What underbody exhausts are available for ph1 172's? I currently have a stealth and not only is it boomtown at 80mph, it's not that stealth due to the ph1's rear bumper. I quite like the look of the pea-shooter tailpipes but not sure what's out there for them. Regards, Mark.

Popping in second gear when i let off / flutter the accelerator about 2 and half revs. Only happens when engine is cold and drives fine otherwise just been fully serviced, any ideas? is this normal?

Hi Just had a new full system exhaust with sports cat fitted on clio 172 cup, parked car for 30 seconds last night then got back in and car exhaust light is flashing like crazy and exhaust noise has changed completely and there is a noticeable loss of power. Reading afew articles on here...

What's the best way of going about readjusting the tailpipes so that the fit flush with the bumper? Looking at them they're slightly off to the right atm. The mounts are in good condition.

Just bought a BG182 that has a Yozza fitted as standard. a lot of previous threads ive read are people saying the Yozza is too loud, on idle I agree it's rumble is great! However I can't decide between my custom made one on my 1.4 or this Yozza. 53 plate is custom. 54 plate is Yozza. They're...

Hey All, Looking for cat-back exhaust systems for my 182 in Aussie - I've had a trawl through the fourms, but thought I'd find out what the general consensus is (aware that loudness etc differs from driver to driver) regarding the different options. I've basically narrowed it down to either a...

My 182 was missing it's exhaust trims when i purchased it but I'm not willing to spend £50 plus on something so small for a replacement so I am looking into getting a replacement 3D printed by a friend with a 3D printer. If I am able to get this done successfully it may mean there is a...

Hi - I used to own a trophy with the OEM system. I found it a bit quiet. I bought a 182 with a K-Tek centreline supersports system with decat. It was way too loud combined with a K-TEk intake. I now only run the KTek back box and the rest of the intake / exhaust is OEM. It's hugely better but...

Hi All, So got my car MOTd at Kwikfit (yeah I know!).. but it was Sunday, etc.. Anyway, my mid section has some small holes in, and the backbox (2yrs old from Eurocarparts) is falling to bits already.. so ideally I'm gonna replace the mid section and backbox. Kwikfit quoted £296 fitted...

When stone cold the exhaust pops from the decat on the overrun from about 4k. Is this normal or because i have no silencer in place?

Hello fellas having a strange one with my 172. As the car gets hotter the exhaust gets louder & raspier to the point where I presumed there must be a leak or a blow in the system. I've been under the car from front to back and there is no leak I can find. It seems to be coming from either the...

My car is due an MOT next month but I have noticed a few leaks coming from the joins on the exhaust. The car has the original exhaust then a Scorpion one from the cat back. I am thinking of renewing the clamps but I am not sure on the correct ones. It looks like it will be this one for the...

Hi guys what are the options for stealth 172 exhausts and how do they compare?

Hi Anyone got any ideas on what this is. I have a 182 and standard exhaust setup. the exhaust was off centre (to the right) and right pipe sitting lower. I've changed the rear exhaust mounts for new ones and has centred them up a little but right tail pipe still lower than the left any...

I deally I am looking for info on the Mk3 PMS system, However as I'm not finding anything on it I would also appreciate view from Mk2 owners. Obvioulsy the mk2 is a different system but in general is it a decent setup? Build, power and noise etc. Thinking of replacing my Supersprint system as I...

Hi Guys, Looking to replace my standard exhaust with something a bit more "boy racer" type. Nothing stupidly loud but something that will make the car sound more acceptable in higher revs and even though it wont make too much difference add some BHP. I prefer a muffly sound to a all out as loud...

I have just taken this exhaust off of my 172, an anyone tell me what make it is? there are no names or markings and the pipe is 2.5" It will shortly be for sale in the for sale section, once I find out what it is.

Hi all For better or worse I have just replaced my Scorpion exhaust on my 172 with a Klarius pattern exhaust (couldn't stand the noise or look of the scorpion). The car is driving fine, but on the way home the emissions warning light came on. I am hoping to get a code reader on it on Wednesday...

hi guys anyone know where i can get my exhaust welded up on essex ? thanks

Hey squad, Long time no speak (and i have let my membership lapse.....#shame) Clio has been trouble free for so long so I can't complain, but lately....wow.....its.....well....its bucked. LOL! Ok, I'll start. 1.) Exhaust rattles. Well, this car has a KTec stealth cat back system on it and for...

If you're on the on the lookout for a well sorted Trophy, then have a look at mine: http://www.cliotrophy.co.uk/forum/showthread.php/43547-193/page4 With all the work I've done, it's up for £5,650, I'm taking a £1,000+ loss with all the refurbishment done. It's a very well sorted Trophy that...

Typically my 182 has developed a blow and my silencer has broken its muffler and is now rattling around in the pipes. I'd really like a yozzasport but they're getting harder to find! Any ideas/experiences with other systems. I currently have a scorpion decat fitted but the rs192 seems a bit too...

First of all I apologise if this has been covered. Looking for a new stainless exhaust for my 182 only thing is which one. I want slash cut tips and a good sound. Quite loud as it's just a toy. Suggestions would be massively appreciated Jeremy tks in advance

Hi guys Just wanted opinions on where I can get an exhaust system fitted in Hampshire? Picking up a cat-back system tomorrow, and will be purchasing new exhaust mounts, fitting kit, and also a new lambda sensor over the next few days. I do have my car booked in at K-Tec for this coming Saturday...

As above had my magnex cat back stainless steel for close to 10 years now and been repaired twice. And the back box is going badly on it now What after market cat back systems stainless steel are available at the minute? Wouldn't mind going for a stealth one this time but with mild noise to it

Looking to strip an exhaust system from the local scrapyards. Cat-mid-rear. I have found a scenic with the same 1.6 k4m engine although th only Clio there is a 1.4, Could I take the scenic exhaust system and take the rear backbox clamp from the clio?? Any help would be great as going down to...

Owners of the pms exhaust (182) post your pics of the fitment ( mid section ) please and videos

Hi All, Appreciate this is a common topic and I have read the other threads regarding this but I am struggling to find opinions an the available exhausts for a 182. I need the exhaust to be very quiet and I want to keep the cat. So far I have narrowed it down to: - BTM 182 - RS192 - KTR /...

Hi guys so I'm finally getting round to getting a new exhaust system! Thinking of going for a miltek cat back. But I've got a few questions.. So I buy the exhaust, I'm not the most diy type of man as I don't have a clue on half the stuff so where's best to get the exhaust fitted? Based in the...

Hi all, struggling to solve a problem with a rattle I have when my exhaust gets hot (doesn't do it all the time) stainless steel custom back box, check its not banging on anything and checked the usual poor heat shield, took to local garage they couldn't find anything wrong....any ideas please ...