Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Cheers for the reply. Took the fuel line off and there was some chaffing about 2mm that cut into the pipe. New one from stealers was £33+VAT - yes, for about 3 feet of plastic pipe...
Hi all,
Past week i have noticed a strong fuel smell in the cabin, ill just bullet point what i know so far.
Strongest smell is when pulling off, cruising i cant smell anything
car wont start first time when cold, usually a prime of the key it will fire up straight away. When warm, it fires...
Release/pressure bearing is engaged when clutch is depressed so its not that - and i bloody hope not main bearing as i have just swapped a box out because of that! lol Dont these boxes whine at all? It only seems to be noticeable at around 1500-3000rpm.
Ordered some Tranself but i notice the box gives a whine now in low speed first gear (not loud loud but increases as you apply revs and vanishes when you dip the clutch), is this normal or should there be no whine at all? The oil i stuck in was some Triple QX 75W80 GL5 but i have read some bad...
Hi all,
I changed my gearbox over the weekend and i am questioning whether or not the oil i have used is any good? I didn't have many options so i have gone for some Tripple QX 75w80 semi-synthetic from ECP...
Nevermind, it was a silly question! Found the answer here as someone else is questioning the difference (includes pictures).. http://www.cliosport.net/forum/showthread.php?659114-Clutch-release-bearings-different-grease-question
Hi all,
droppped my gearbox today to replace it and the clutch. I have a new Valeo clutch kit and was wondering why the old bearing looks different to the new. There seems to be some difference where the bearing makes contact with the pressure place.
Am i supposed to remove anything off the...
Ok had a good look over it today and its deffinately the box. Would any recommend buying a second hand box as money is tight at the minute? One place i rang said it would be 380-420 to rebuild the box. Im in the Nottingham area.
Cheers
Ok, does this not sound like a clutch bearing problem then? I assume if it was clutch i would only hear the noise when pressing down the clutch pedal? Cheers
Hi all,
I have done a quick Google but aren't satisfied i have found the cause of my issue (want clarification).
A problem started today where when driving i can hear a like rubbing whine if that makes sense (not really the whine of a diff) which gets louder when i let off the accelerator and...
Lovely P1 mate, if i am right this used to be parked up at Hartley business center? Used to work there and remember seeing it all the time a few years back.
http://www.carparts-tuning.co.uk/ind...param=FKZZRE14
Does anyone know if these will fit a 182 Ph2 2005? IIRC arent the 182 p2's 58mm? Seems a bargain at 11 quid!
Cheers