Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
When going over bumps I get a harsh thud noise from driver side, likewise if im going realitevly fast around a left hand corner I can hear a judder/scrubbin noise from the same side. I don't drive the car hard so it's not as if im thraping the cr*p out of it, this is just normal driving.
Jacked...
Driving up a hill so put my foot down a little, starts sluttering then all ok. Come to park up down the road and the engine stalls, on ignition it hessitates and then finally fires up and sounds like a scooby. It stalls on idle so had to keep my foot down to get the car home.
I did change the...
I've recently bought a 55 plate 182 and when locking/unlocking, it makes one hell of a loud beep on the alarm speaker. When I'm in a multistory carpark everyone looks at my car when It beeps!
Is there a way of changing the volume or should it be located somewhere deeper in the bulkhead/around...
Selling up so have a look if your interested :)
http://www.pistonheads.com/classifieds/used-cars/porsche/cayman/porsche-cayman-s-3-4l-2006--pccb-pasm-sports-chrono-19-carrera-s-wheels/4553999
Any help on which spec to chose from these days, pre-built or home built - I don't really mind. I'm so out of touch with what can be bought it's best to ask on here first.
Budget of £500 for the PC and £200 for a monitor, or a bit of give and take if the spec is better for either to justify...
What would be a realistic price for this condition PB 182?
http://www.ebay.co.uk/itm/2005-05-Reg-Renault-Clio-2-0-16v-Renaultsport-182-RARE-PETROL-BLUE-GEN-60-000mls-/351374014420?pt=LH_DefaultDomain_3&hash=item51cf85f7d4
Bit of a long shot but has anyone ever done this with any luck? I have previously done a complex CAD model in SolidWorks when the motherboard fried itself. Rather than buy the same one I bought an upgrade and formatted everything like a plonker (this is going back 4-5 years). Is there any chance...
http://www.pistonheads.com/classifieds/motorsport/track-day-cars/road-legal/renault-cliosport-172-cup--big-spec-track-car/2460809
Basically my insurance is up this Monday, tax and MOT are due on the 31st - I want a new sports road car so this needs to budge. For this weekend only I'm open to...
Is it possible to install the digital heater control in a 172 cup? I assume the fan blower will need to be swapped too as the cup uses cables to control the heat and direction. Are there any other parts that need to change over? Does the loom connect both types?
My front pads need to be replaced so I've bought some Mintex 1144's at a good price. I will be using ATE Super blue as I still have some left over from the track car, is it really worth getting braided lines or will I feel a sufficient benefit with the pads and fluid alone? This is my daily 172...
I'm currently living back with my parents on a temporary basis, their router is a pile of filth (SKY SAGEM). It will often cut out or go from a half decent Mbps to nothing at all, my mobile struggles to pick anything up and often switches from wirless to 3G on a regular basis.
I don't want to...
My car was 103db on the static test last week so only just passed the noise limit for Oulton.
Does anyone have any tips/advice on where to place a silencer and what to use if I make my own version? Reason for asking is that I'm thinking of turning the decat into a proper silencer so that I can...
I need to get one for the track car after having the glass replaced. Thought I'd knock up some strips as I'm bored, not sure if they are chavy so might just stick with plain black. Comments and pics welcome :)
Yozzasport because this was the first time I met Fred and Andrew and iir their cup...
I saw these on ebay whilst searching for standard ones... Would look quite nice on the track car, has anyone used these before or got any reason not to...
I've bought a genuine Renault touch-up set but for some reason the paint does not cure in the centre. Ive cleaned and used isopropyl spray, then applied a fine line of paint into a deep scratch, pat it down after 15min as per instructions. After two days I try to wet sand the paint down, the...
After months of looking for a tidy towing car I decided to knock things on the head and buy another CS lol. I capped my budget down and this little tinker cropped up.
After a jet wash, deep clean and then left dry we (me and Matt350) started to clay bar the car in preparation for machine...
Following on from my alloy rad thread. Does there seem to be a variation in quality from different manufacturers? Are these things just re-branded from the same place? Venair/Samco seem to have a huge price difference.
After quite a crappy year in my personal life I decided to splash out a little and have something I've always wanted since owning a CS... ITB's!! :evil:
It's taken quite a long time to get the car to this stage but its done, mapped and no going back now! I now need to sort a track day out...
Probably a silly question but can you wire in any old 12v socket into any live feed? My track car had it cut off and it's proving a pain when I need sat nav on charge. I can't find the old wire as the loom is all wrapped up.
Who has done this and what was involved? What is the spacing difference between centres for each model?
If I machine the hole centres, is there anything stopping me slotting one hole, or making the one hole larger and machining a rocker spacer like the AST Sportline II coilovers? as below...
I...