ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Powder Coating



  Clio 200
Can anyone recomend somebody in the Central belt ( preferably near Falkirk )that can refurb and powder coat wheels. My car came with white speedlines ( on a white car ! )and are murder to clean and keep clean.Thanks in advance .
 

rctempire

ClioSport Moderator
I do recommend these guys, top notch jobs too. Do more coating for other stuff too.

P & J Powder Coatings
Address
7 Evanton Place
Glasgow
Thornliebank
Phone - 0141-6201652


OR
Central Powder Coating (Scotland) Ltd

54, Arrotshole Rd, East Kilbride, Glasgow, Lanarkshire G74 5DN
Tel: 01355 222180
 
  Track 172cup
That's who has been mentioned to me a few times. Think they are £50 a wheel?

depends what wheel size your talking about mate, i'm sure they were about £35/40 a wheel up to 17" and about £45/50 for 18" but that was a while ago, they used to ask you to take the tyres off before giving the wheels but not sure if they will do it for you these days, best getting in touch with them mate if your interested
 
  Polo BlueGT
Autoecosse did mine a while back, 4 15" to be powdercoated and tyres removed and refitted was £270, about 3 years ago. I've heard good things about Kingdom coatings as well.

theres a place not to far from there ( in carnoustie) that get rated highly, not to sure of the name tho :|
 
  3 Series xdrive
http://www.rmcoatings.co.uk/

Same day service....

"We do not do painting only spray powdercoating (we believe a much better
finish).
e.g. The cost for 1 wheel up to 17" is £55.00 + vat @ 20% = £66 each

The cost for 4 x up to 17" wheels is £175.+ vat £35 = £210
Finish - colour of your choice. with or without sparkle.
If you pop them in early one day i.e. 8-9a.m. they should be ready the next
day.
Perhaps 2 days if handed in later in day

If your are bringing them in on the car incl jack up etc the cost would be
(per set of 4)
£200 + vat £40 = £240
Same day service. You would need to book in and have the car here for
8.00am to pick up around 4.00pm

Balancing is extra for set of 4 £18 + vat £3.60 = £21.60"
 

Stu.

ClioSport Club Member
  lots of clios.
Got 4 15" rims done at IPF in glenrothes, fife. £140 and they look spot on!
 

Gally

Formerly Mashed up egg in a cup
ClioSport Club Member
http://www.rmcoatings.co.uk/

Same day service....

"We do not do painting only spray powdercoating (we believe a much better
finish).
e.g. The cost for 1 wheel up to 17" is £55.00 + vat @ 20% = £66 each

The cost for 4 x up to 17" wheels is £175.+ vat £35 = £210
Finish - colour of your choice. with or without sparkle.
If you pop them in early one day i.e. 8-9a.m. they should be ready the next
day.
Perhaps 2 days if handed in later in day

If your are bringing them in on the car incl jack up etc the cost would be
(per set of 4)
£200 + vat £40 = £240
Same day service. You would need to book in and have the car here for
8.00am to pick up around 4.00pm

Balancing is extra for set of 4 £18 + vat £3.60 = £21.60"

Thanks for that Daz I fancied getting my wheels redone.
 
Thats quite expensive Daz.

The place I go done a set of 18's coated, balanced the lot all in for less than rm coatings want before they add the vat!
 
  Flame Red Delight
I fancy getting my wheels done but that price above seems a bit steep, apparently there is a place in linlithgow that does them cheap? by cheap im meaning about £150 a set
 

koi

  Audi S1
I want to get mine done but need to find a cheap set to roll around on while it's getting done.

Prices I got for 16" are:
Carrick in Prestwick £170
Chameleon in Renfrew £180
 

Gaz85

ClioSport Club Member
  330e, golf r, EP3 s4
Ace Alloy Wheel Repairs
13 Murray Terrace, Carnwath, Lanark ML11 8JA
01555 841 000

Is who I used on the cup a few years ago was like 60 per wheel with a flake through them and balanced. That included sanding them down as mine were flaking and weren't smooth. Did a great job!
 


Top