Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Thanks for the replies, i'll undo the bolts and pull the alternator forward for now then. Will see if adam can get one as i need some other bits too !
Cheers everyone
My aux belt has been squealing like a b*tch for a while now and cant put up with the embarrassment of it squealing for about a minute every time i start it up.
I was told that the nut at the top of my alternator to tension the belt has snapped off. Is there any other way to tension the belt or...
Thanks for that! The bloke at my local breakers is trying to charge me an extra £40 for a "172 cup hub" as they are different and hard to come by apparently. Think i'll go elsewhere in that case. Cheers joe
Hi, ive had a search but cannot find a definitive answer!
My 172 cup needs a new hub, do i need one from a cup or will a standard 172 hub fit ?
Thanks, Lee
No because from underneath you cannot get your hands round to the otherside to hold the bolt while you put the springs, washers and nuts on ( unless you have 10ft arms like dan said)
I did it not so long ago.. I was underneath and i had a mate in the engine bay holding the bolts in place while...
I had a vts and people seem to under estimate them! It was pretty rapid. I think they are just over 900kg. I loved mine but got fed up of repairing it !
I'd imagine they would all have different plugs and lengths of the lead, but dont know for sure.
I took mine out and gave it a blast with a compressor and some brake cleaner and it made no difference.
1. Craig (197 or ph1 172)
2. Jared 172
3. Gez. R.S 200
4. Oakley12
5. Matt W
6. MJRacing 172
7. SharkyUK (if car is back in time and engine run-in)
8. Ashey
9. cwalmsley
10. Podge
11. Pbufton
12. JDA92
13. Dan
14. Craig
15. Noddy
16. Mark
17. Keechy
18. Lee24
Yeah it was good to meet everyone ! Massive pile up as i got back into swansea, on the otherside ! Looked really bad, loads of people getting cut out and loads of emergency services.
Cheers for that link, ive done loads of searches and never come across it. Going to give the car a good clean now and get onto that aswell .
thanks again
Excellent, is it just the doorcard plastic you have to cut, and then fit the spacer onto the door ? Think i read somewhere 10mm for spacer, is that ok ?
@ Luke, i know im gonna have to get them in now lol.. They are quite an improvement over standard! Did the tweeters fit ok in the dash? And im...
I used a 3m kit, i think alot of other members have aswell. Headlights look like new now. Gives you an attachment for a drill so less elbow grease is required !
He listed them wrong, just cant be bothered to package them back up, send them and wait a weeks for a refund! If i cant fit them my mate will have them for his leon. Its just i wired them up in the car and they sounded awesome!
Hi, i bought some component door speakers from ebay ( vibe sek50 ) which are 13cm speakers but when they arrived they were the sek60 and 17cm. Ive had a search and it seems people have managed to fit them but it requires cutting out part of the door card! Is it advisable to do this, or just get...
Cheers for the replys, ive been out to pick up a chineese !
Ive got a mate to give me a hand aswell. Would halfords or local motor factors have the silicone? I hate exhaust paste!
Jay.s thanks, that is the way i was planning on doin. . Ive already picked up new mounts, on the old ones ive got...