Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have been thinking about changing my standard HU in my 200 cup to an after market one. Its been some time since I did any audio upgrades to a car, so:
Will I need any kits for the steering controls (volume ones on steering wheel)?
Will the new HU work with the dash display, can you can...
Hi,
Does anyone know of any good dent removal specialists in the Birmingham area? My parents are selling a car an want to take some small dents out of it before selling etc.
Cheers.
My mate wants to get his wheels sprayed the same athracite as that on my 200 cup, does anyone know the Renualt colour code for the anthracite for the standard 200 cup wheels?
Thank you.
Does anyone know of any good touch up paint for red brembos?
I ask it seems of have a few small stone chips on the passenger side calipers and wanted to touch them up with some good colour matched paint.
Cheers.
Ok I know its French and I can take most rattles etc, but this one is getting annoying.
There seems to be a vibrating/buzzing noise around steering column when going over slightly rougher tarmac, only started recently. Sound like something is loose and then vibrates when the shock from...
I have a 200 cup and the brembos have been squeeling under moderate braking.
Renault Birmingham dont seem to want to know for warranty work and say its not covered for that even though the car has only done 4000miles?!
So I am thinking I may need to strip down the brakes and give them a...
Hi,
I recently had some fog lights fitted to my 200 cup.
All the relevant parts were fitted to the wiring that was already there inside the bumper and I had a new switch fitted (with the front fog light option).
Only problem is they just dont work?! The garage said they have checked...
I have recently had some fog lights fitted on my 200 cup (not FF) and I have had all the correct parts fitted etc including a new switch with fog light option. All of the wiring was already there (minus the loom to connect each fog light).
However the lights just wont work, so I have come to...
Had a local garage take my front bumper off as I am looking at getting some fog lamps fitted, anyway the car came back and i noticed 2 pop rivet fixings showing through the headlight where the black bumper insert fixes to the bumper.
I dont recall seeing pop rivets before, which makes me think...
There was an option if I recall for privacy tints (rear side and tailgate).
Does anyone know what % the tints are as factory standard?
Cant be more than less than say 35% light transmission (clear being 70%?) can it?
I ask as I am thinking of having it done to my 200 cup.
Thanks.
Could some one provide details of how I can take off my existing door handles and replace them on my clio 200 cup?
I understand that the door cards need to come off etc etc, but just wondered if there are any things i need sto make sure i do, or and order to do things in.
I replacement door...
I noticed when i apply my handbrake, for example on my driveway which is at a decline, the rear beam or whatever it is creaks??
Is this normal? For example once the handbrake is applied and you get out the car, as the car rises there is a creak noise? This only happens when the handbrake is...
I have had my 200 cup since December now and I have noticed when applying the brakes they squeek?
I assume they have fast type road pads fitted as standard and thus unless fully warmed up they will squeek? Does anyone elses 200 do the same??
I'm after a good bodyshop for some colour coding on my 200 cup.
Any recommendations, needs to be in West Midlands area and preferable near Solihull.
Cheers.
Whilst driving I noticed a creaking noise coming from inside the car and it appeared to come from the rear seat bench.
Anyway once parked up, I opened the boot and pushed the back of the rear bench and it made a creaking noise whilst doing so.
This clearly means it is the rear bench and...
My cup didnt come with the 'cup' badges and my local dealership is now sending me some out.
So that I stick the badges in the correct general location, could someone with a 200 cup post a general close up pic of theirs (i want it in the same location as per the factory would have done etc)...
I have seen a few 200's with the B pillar cup badges? Mine didnt come with them and I was wondering:
a) Are these other badges that have been bought (182 cup?)?
or
b) They didnt fit them to my car and you can purchase the cup badges for the 200?
Cheers.
This is my first clio and I understand this may sound a bit dense lol.
Basically should the centre dash console show the temperature on the clio 200 cup?
I have looked through the manuals and it says yes, however all that is shown on the display is the time?
Is there something i have to...
I have a set of painted door mouldings I want to put on my new clio cup, however i need to remove the existing ones first.
How do i do this??
It looks like they just slide off? If it involves taking the door cards off then I dont really want to attempt this (on my new car) lol.
Decided to opt for the 'GT' spoiler and had some colour coded wingmirrors.
So far only covered 50 miles, so breaking it in for another 550, its been a great drive so far.
Satin Chome door handles:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190465820882&ssPageName=STRK:MESELX:IT
Full set of door mouldings:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190465820602&ssPageName=STRK:MESELX:IT
Door Moulding, Full Set:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190465820602&ssPageName=STRK:MESELX:IT
Satin Chrome Door Handles:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190465820882&ssPageName=STRK:MESELX:IT
I recently ordered a RS Clio 200 cup recently and i noticed when looking on the order form that is says:
Model: Clio Hatchback
Specification: 2.0 16v Renaultsport
My question is should it have 'cup' anywhere on this form?
Anyone that has a cup, could you check what your order form said...