Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I can recomend using Stoney Cross Garage in Spondon (Derby) for cam & aux belt changing. They have the original tools and have done several cars now, albeit they do moan about access, or lack of access for working on.
Cheers Jamie
JL stuff in general should be considered high end (I have a 10W7), I would not buy any other brand if your aim is SQ. If you just want bass then there are other brands that give higher output but sacrifice the quality of sound.
Yes the wiper operations are working perfectly, I'm guessing an iffy connection somewhere and hoped soemone else had experienced this issue and could have pointed me straight to the fault, rather than going through the process of checking all parts of the circuit . Which invariably means the...
Hopefully someone can point me in the right direction with this one.
Basically the fault at present is intermitent, but when I operate the stalk for windscreen wipers & screen wash operation the wipers start but the washer jets don't squirt. I can't hear the pump trying to operate, and...
Without wanting to fuel this debate, but I've done lots of other cambelts that have similar set ups as regards taper lock arrangements. And on those cars I typically lock the cams & the crank and done the job without issue. Can someone please confirm the latest Renault part references for the...
Hi all,
Reading through the Renault guide for cambelt change I am correct in presuming the function of the above tool is purely to facilitate the loosening of either inlet or exhaust sprocket??? If so can I simply use alternate means to secure the pulleys or is it absolutely required...
Ok guys thanks for the feedback so far but can I clarify a couple of points;
Should I ditch the structbrace and spend the money on the coilover kit ,on the basis the clio doesn't 'flex' that much??
Secondly brake choice sounds okay moneywise, do I simply leave the rear set up as is...
Hi all,
Time has come to think about giving the suspension & braking of my stock 03 plate 172 FF (55,000 miles) an overhaul. For convenience I've looked mainly at the KTEC site as they offer potentially everything I'm likely to need/afford. I'm reasonably convinced on purchasing the front strut...
Hi all,
Got an Alpine aftermarket HU (7998R) and radio reception is poor for either 'local' radio stations and Radio 1. However crappy radio 2 and other Terry Wogan specials are okayish. I've checked fitment in the dash area and also done the clean the ariel mast and fixing point but...
I've had the head unit for 5 years and been gathering dust for the last 2 years since selling my other car. So decided to bung it all in the clio ,bought the leads from halfords and a year later on getting round to it, I can't get them to work now which is annoying as taking the dash off isn't...
Suggest you remove door card first and operate the CL whilst having a can of WD40 on the relevant bits. That normally lubricates parts that have simply dried out.
Hi all,
I've bought the autolead connector kit including the PX kit for the display, but I can't get either the steering controls to respond or get anything on the dash display. I've connected the red connector block to the display at the back of the clock, plugged the iso leads from HU to...
Folks without trawling the entire thread of responses the answer is simple. Pressure is pressure but flow is different based on the both compressor & turbine wheel sizes.Whilst you mention a 28 housing there are many trims in which that can be supplied which will affect flow. Also noting that 7...