Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I want to drop the ride height of my 182 but not too much so it starts scrapping over speed humps etc...
Was thinking 30mm?
What the best springs to go for?
I'm south oxford. Might be able to trace the car I keep seeing in Abingdon. 182 in mondial white stripes and wheels? Also another I followed out of didcot to the a34 the headlights where well bright? Was also mondial but no strpies.
When I bought my 182FF I was told it had the 98RON Map on it?
Is this an RS tuner map and is there anyway of validating it as I have no paperwork for it?
Guys story goes like this. Car was running a bit rough when I picked it up. Done a search and saw that injectors were very common. So checked all 4 and found that Cylinder 4 Injector the actual plug had come away from the injector body. So replaced that and all seemed ok for a while. Now when...
Guys I have got the code using the security number and the bonyx website I've entered it as per the instructions and it doesn't work I've tried it on both the stereo buttons and the stalk?
Any ideas?
My apologies for the banterish style of my post I shall only speak in the Queens English from now on.
I'm in much need of replacements for my perished steering rack gaiters as they have perished and split.
Are they a Renault only part as my local motor factors list an item that is not the...
I'm pretty sure they are the same. Two bolts hold the bottom of the strut to the hub(18mm). Then undo the top but to remove the shock. You'll then have to get the spring compressed in order to change the top mount.
Re-assemble in reverse.
I was aware that cylinder 4 is the cambelt end. I haven't changed the lead but would it not do it all the time not only when hot. I was leaning more towards heat soak of the coilpack?
Guys I've got a small problem where whenever my car is started from cold it runs fine. However when i sometimes start it whilst its still hot it misfires badly for a minute or two and then it is fine again? I've had the codes read and it comes up as cylinder 4 misfire. I have already had all new...