Spolier fitting issue, washer jet.

[Barnett]

Currently trying to fit a colour coded 172 spoiler to my non-sport. I have the old one off but can't get the washer jet tube out, nor can I find where I can connect the new one. I tried just yanking it but it won't budge. I've had a look under part of the roof lining and still can't see where or what it connects into. The tube on my new spoiler doesn't look long enough to reach any further than where I've searched.

Help would be greatly appreciated. Thanks

 

[Jordy1982]

Take the tube off from the rear of the washer jet nozzle.

You don't have to remove the pipe. It stays put on the car.

Just give the tube a pull at the washer nozzle end.

 

[Addicted]

You will need an extension if it doesn't fit - i needed an extension when I fitted my cup spoiler - just leave it off for now while you get one.

 

[Jordy1982]

Is it cup spoiler though?

I assumed non cup spoiler so should be fine.

 

[Barnett]

It's non cup spoiler so just the same as the dynamique one that's already fitted but smooth and colour coded. Thanks for the advice, will give that a try now.

 

[Barnett]

that did the trick, made that way harder than it needed to be for myself thanks

 

[Jordy1982]

that did the trick, made that way harder than it needed to be for myself thanks

Good stuff!

 

[Chappersboy]

Hi I'm try to fit a dynamique spoiler and I can't get the brake light to clio in any ideas??

thanks Sam

 

[Zeitgeist0190]

Brakelight possibly dead?