Clio 172
I've ordered a group n upper engine mount and powerflex dogbone mount bushes from k-tec and am expecting them hopefully tomorrow at some stage. Plan on fitting them myself, but just want to clear a few things up first..
For the upper engine mount, i loosen the 3 bolts where it connects to the top of the engine, support the engine on a jack, loosen the big bolt in the middle, lift the bit that connects to the engine off, undo the 4 bolts where the mount connects to the chassis, lift the mount off, put the new one on, 4 bolts on torqued to 62NM, bit to connect to engine back on and big bolt torqued to 44NM, 3 bolts connecting mount to engine back in and torqued to 62NM. Is this order right? Anything i'm missing?
For the dogbone mount (inline type), i take the mount off, press the old bushes out, grease the new bushes and push them in, put it back in loosely, loosen the 4 bolts for the upper engine mount and pull the engine forward, torque them back to 62NM, tighten the dogbone bolts to 62NM. Again, is this the correct order? And is there anything missing? Do i need to support the engine or gearbox when doing this?
Thanks
For the upper engine mount, i loosen the 3 bolts where it connects to the top of the engine, support the engine on a jack, loosen the big bolt in the middle, lift the bit that connects to the engine off, undo the 4 bolts where the mount connects to the chassis, lift the mount off, put the new one on, 4 bolts on torqued to 62NM, bit to connect to engine back on and big bolt torqued to 44NM, 3 bolts connecting mount to engine back in and torqued to 62NM. Is this order right? Anything i'm missing?
For the dogbone mount (inline type), i take the mount off, press the old bushes out, grease the new bushes and push them in, put it back in loosely, loosen the 4 bolts for the upper engine mount and pull the engine forward, torque them back to 62NM, tighten the dogbone bolts to 62NM. Again, is this the correct order? And is there anything missing? Do i need to support the engine or gearbox when doing this?
Thanks