ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
It needs to be cleared before it will turn off as it will still be showing old faults.
MarcB
ClioSport Club Member
Too Many
Get a cheap engine management code reader that is ok to check simple things. This can be bought from Ebay for as little as £14.
It will tell you the problem and let you reset the code and turn off the engine management light on your dash.
http://www.ebay.co.uk/itm/CAR-FAULT...iagnostic_Tools_Equipment&hash=item3cd647a1ab
If you want it the car looked correctly and all the codes given to you in detail or deleted fully take it to someone who has a genuine Renault Clip (Main Dealer or Renault Specialist)
182
If the fault is fixed then the light will go out itself after a certain number of miles. For me it took a couple of days of driving, half a tank of fuels-worth, so approx 150 miles.
Having said that, when I had the light on it was for an unknown reason and never came back. More recently when a faulty injector was causing a missfire, for me the light was only flashing and this stopped as soon as the new injector stopped it missfiring. It sounds like your light is on for another reason IMO
Having said that, when I had the light on it was for an unknown reason and never came back. More recently when a faulty injector was causing a missfire, for me the light was only flashing and this stopped as soon as the new injector stopped it missfiring. It sounds like your light is on for another reason IMO
Last edited:
MarcB
ClioSport Club Member
Too Many
You will still have a brake pedal fault stored with no lights or warning on the dash.
When the EML comes on the stops cruise control, when you plug it into a clip it throws up a brake pedal fault which i don't think can be cleared unless you have a good diagnostic tool or clip
182
brake pedal fault??? I thought the OP was on about his engine light, or the emmisions warning light as renault call it. Or have I missunderstood what he was asking?
The only time I've had cruise affected is with the abs and serv light on. Again, once I fixed the cause the lights went out and car works perfectly again. My car has never seen a CLIP!
The only time I've had cruise affected is with the abs and serv light on. Again, once I fixed the cause the lights went out and car works perfectly again. My car has never seen a CLIP!
Last edited:
MarcB
ClioSport Club Member
Too Many
No matter what the fault is if the EML light comes on in your car it turns the cruise control off which throws up a brake paddle fault.
Every time my EML came on due to a lambda fault i cleared it with my £12 hand held scanner and the cruise control would work but the fault was stored it would either need a good decent diagnostic tool or clip to clear it
MarcB
ClioSport Club Member
Too Many
I have no idea why renault made it that when your EML light comes on your cruise control is also disabled.
As i say i had a lambda fault for months, keep on putting the light out myself with my code reader so there was no light and my cruise control would work but the fault is stored in the car and needs deleted.
Similar threads
