Clio 182 cup
Any advice on fitting this? what fixings are required etc? we have just the subframe atm!
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Fitting of a passanger side OMP Subframe Seat
- Thread starter Mrowlboy88
- Start date
Clio 172 Merc ML55
I did put something up about this month's ago.
From memory mine are as follows
M8 x 40 (I think)12.9 high tensile cap head bolts x 4
M8 washers x 8
M8 penny/repair washers x 8
M8 nyloc nuts x 4
I also reused the original top hat nuts from the seats to double up underneath, also used one of each washer top and bottom.
I removed all the plastic spacers from the car floor as well, as a side note the omp subframes don't sit level, to correct this the inner side needs to be raised by approx 20mm I think so would need longer bolts if you go down that route. I didn't bother as my omp frame is only temporary until I go for a lower option
From memory mine are as follows
M8 x 40 (I think)12.9 high tensile cap head bolts x 4
M8 washers x 8
M8 penny/repair washers x 8
M8 nyloc nuts x 4
I also reused the original top hat nuts from the seats to double up underneath, also used one of each washer top and bottom.
I removed all the plastic spacers from the car floor as well, as a side note the omp subframes don't sit level, to correct this the inner side needs to be raised by approx 20mm I think so would need longer bolts if you go down that route. I didn't bother as my omp frame is only temporary until I go for a lower option
Clio 182 cup
Top man!!
Similar threads
