Exhaust :-(

[Arctic_182]

I have just had fitted a ktr janspeed to my 182 & it just won't seal the joint from cat to ctr section the garage used paste which is know i sh*t i'm going to do it myself this weekend I've heard people use loctite 5920 is this any good?

 

[hipwell]

I used some black loctite high temp silicone, seems ok

 

[Dave..]

Clean the joint off with a wire brush, get rid of all the crap. Tighten the clamp up, really tight, hi temp silicone around the whole lot.

 

[Arctic_182]

like this

http://www.halfords.com/webapp/wcs/...165691_langId_-1?cm_vc=IOV4PDPZ1&iozone=PDPz1

 

[Dave..]

I used this:

http://www.halfords.com/webapp/wcs/..._productId_749361_langId_-1_categoryId_165691