172 CUP
Been looking into getting some cams for my 172 cup,mine allready has matched inlets,182 manifold,yozza exhaust and cda carbon airbox,custom remap by in-car-tech at 189bhp and 161 lfbt.
been searching loads on here and only seems to be a few posts on the piper cams or kent cams rn2004 just wondered what the verdict or possible reveiws from other peeps on here is
choice at the moment is -
1. cat cam 421's - 276deg inlet / 268deg exh
2. piper bp270 (re-Profiled) 278deg inlet / 270deg exh
or
3. kent cams rn2004 286deg inlet / 278deg exh
I am really not bothered about lumpy idle or poor running while driving around town / low rpm etc etc and i allready have a top man to do my remap so thats not an issue.I do plan on taking it around the track and day to day use,but as stated earlier lumpy idle and poor slow speed running is not a problem.
Thanks in advance guys.
marcus
been searching loads on here and only seems to be a few posts on the piper cams or kent cams rn2004 just wondered what the verdict or possible reveiws from other peeps on here is
choice at the moment is -
1. cat cam 421's - 276deg inlet / 268deg exh
2. piper bp270 (re-Profiled) 278deg inlet / 270deg exh
or
3. kent cams rn2004 286deg inlet / 278deg exh
I am really not bothered about lumpy idle or poor running while driving around town / low rpm etc etc and i allready have a top man to do my remap so thats not an issue.I do plan on taking it around the track and day to day use,but as stated earlier lumpy idle and poor slow speed running is not a problem.
Thanks in advance guys.
marcus