Search results

Where is it located? My car is a 1.6 ph2 just for reference

Hi guys, Ive had this intermittent fault for a while now, sometimes when i turn the ignition on nothing happens, all i get is a relay click from under the glovebox but the starter motor doesnt come to life. for a few days it will be fine and then i get a couple of days where it does this every...

Mine on coilovers. pre spacers, camber and a few other bits and pieces ive done since then. Splitter is probably around 2" from the floor on the front. adjusters removed on the rear.

Bought my car from these guys, they do loads of replicas, some better than others. Pretty reasonable guys though.

Hi guys, My 1.6 has developed an intermittent missfire. I was just wondering if there was anyone local to the Chichester area that has a code reader, or any sort of diagnostic equipment i could perhaps borrow, with your assistance for 10 mins to see whats going on? Already replaced all 4...

They are plastic and glued in place with a plastic pin that pushes into a drilled hole underneath, i tried to take one of mine off to do the same thing and it just snapped off, luckily glued in to place again fine. if you could source new plastic 'screws, rivets, bolts, whatever you want to call...

I've got some for sale, would be suited with uprated shocks though. Pm me if interested and I'll send you a pic of how they sit. I have no need for them now as I changed direction with the car.

little thin screwdriver was what i used on my old phase 1. just wedge it under the clear plastic and pop it off. looks like you had a go at that already though looking at the marks haha.

You were bang on mate, cat had disintegrated. All sorted now. Cheers for your help

Ahhh bollox, that sounds about right tbh. It looks like a proper tight squeeze under there. Will get it in the garage tomorrow

What's it like while ticking over? Mines quiet then. It's just when I put my foot down its gutless and really loud!

Well this is what I'm thinking now. It all sounded like induction noise. But now it's gone totally gutless and it sounds like it could be from the manifold to cat joint. It's sounds horrible!! It's kinda odd though as when the cars stationary and I give it some revs it sounds like induction...

It's gone abit rusty tbh, was only a cheap metal mesh eBay jobbie, gunna swap it over for another new one I've got and see what happens.

I've had an induction kit that I made up myself fitted to my 1.6 16v fitted for around 8 months now. (Positioned the cone behind the headlight much like the ktec kit for the sports) it's been fine since I fitted it at the beginning of the year but last night on the way home it became unbearably...

And me haha, been running over 3 on the rear of mine for a while now with barely any abnormal tyre wear. quite suprising really. a couple of degrees should sort your issue. just get the shims :)

Could be a good fix for iPhone 5 users that only have a 30 pin connection from they're hu. I ended up buying the £25 adapter from Apple to convert to lightning, rip off!!

i didnt see you mate shouldve flagged me down!

1) Luke - The Boosh! - Trafic Van - 2 2) Joel - JDA92 - clio 1.2 - 2 3) ollie - banther - 172 cup - 2 4) Jamie - Jesus - 182 trophy - 2 5) Nick - nick172sport - 172 ph2- 3 6) Nathan - cuttsy182 - Clio 182 - 2 7) Evan - cheekyboy - Clio 182 Cup - 3 8) Liam - .LiamC. - Clio 182 - 2 9) Craig -...

Looking to replace all of my mounts as there seems to be alot of play in them now,i know the dogbone mount is a doddle to replace but what about the others? Easy diy job or am i better off not being so tight and chucking it in the garage to get them done? im not bad at home mechanics and have...

No worries, let us know how you get on

Looks like this could have a good turnout :)

Get under the car, wd40 them and scrub the threads with a wire brush, as they are open to the elements they just rust on the underside and lock in place, once cleaned they are a lot easier to remove with a half decent breakers bar.

Still in chichester mate, brasserie blanc at the hornet, u gonna head up to the portsdown meet on the 17th? Would be good to see ya pal

Didnt spot you mate, wouldve been on my way back from work.

1. TimR26 2. Christopher 3. Fletch. 4.Davyy 5.Matt 6. SamTUFCBatch <-- if im not on the late shift ^.^ 7. Youngstig

Awesome pic mate, cheers for that, shame about the smashed foglight, got a new one turning up this week so thats one niggly bit off the checklist. Will do paul. :)

Nice to put faces to names, I live literally 2 minutes down the road from the motor circuit but often work late on a Saturday so don't have the energy to get up in the morning, will make sure to join in on the next convoy there though. Are you guys attending the portsdown hill meet this month...

Saw a few of you guys here today, in my pb ph2 non sport on bbs reps. Track prepped ph1 with drilled holes in the rear bumper, said hi as I was leaving. sunflower ph1 parked close to the above, Trophy parked in the middle of the car park and lastly a bg 182 in a convoy with a few cars on the...

Re: Meet at D-Day Museum Car Park (Portsmouth/Southsea) 17th March, Sunday, between 6 Working that night! Bad times

I'm in chichester so not a million miles away, I'd be up for a meet in the area some time soon