Search results

Ok so my car is currently running AT Power ITB's standard cams and OMEX 600 on standard 182 engine (AC & PAS Delete) I don't want to go silly on the engine as although it is a competition car it is still road legal. seeing as engines are not that expensive (Standard ones) and not a grand sum...

Hi All, Got an issue with my 182 i'm trying to trace, does anyone have a Pinout ECU diagram or Engine Wiring Diagram (would be handy for another job i need to do). Where do the 182 CPS wires go?? would rather test them before pulling the loom apart. do they go straight to ECU if so which...

Hi, Anyone got a CLIP Diagnostic tool, I'm in East Devon jn28 M5. trying to trace an immobiliser issue.

Ok, just swapped the engine over from my 172 to the 182 (using original 182 ecu and loom) and its not starting while cranking it will either kill the cranking after a few seconds or it will crank over. the circular immob light stays solid while cranking (i've split the key open and tested it...

Doing an engine swap from 51 Plate 172 into 04 Plate 182, the looms appear to be the same apart from 1 plug (I'm trying to get a photo of it) It goes into the fusebox (with the big white main plug) it is a white plug a little smaller than the main one and only has 4 or so wires to it? thats the...

Got myself a second 172 which i bought just for the engine but want to test the engine properly before putting it in my 182. but getting a Violent judder / stalling symptoms but don't think it stalls when full throttle is applied, its fine on partial throttle. when it does it the lights light up...

So I've got a Clio 182 Engined Vehicle running AT Power Throttle Bodies & OMEX 600 ECU with straight through exhaust system (decat) The purpose of the vehicle is to be used in prod or mod prod class in hillclimbs & the occasional road use (Road legal). Its fully stripped and just about to have a...

Hi All, I'm at the stage of wiring my 182 Engine up, I thought it may save some time if I asked on here what sensor can be utilized on the standard engine when using OMEX, as its a Siemens ECU etc originally do you have to use a crank wheel & a ford coilpack? would like to know so i can order...

Hi guys, Just wondering if anyone of you happen to have the wiring diagrams from one of the places on eBay as i need the Main Engine wiring diagram for tommorow to label up. Specifically i require the white engine plug wiring diagram, Would be great if anyone has access to this as i need to...

Hi, Looking at getting rid of my PAS setup as there is no need as i am running electric pump in my setup, so the second pump is obsolete. looking at the routing of the aux belt, it seems the belt is double sided? as it drives the water pump on one side of the belt and all the rest on the other...

Cosidering doing the clutch change on my Twingo 1.2 TCE which is exactly the same as the Clio III 1.2 TCE. done gearbox changes on 106 Gti's many times but its on a much more expensive car and don't want to **** it up, so would anyone be so kind to do a guide or just a step by step guide, or...

Hello All, Am looking at doing a converision into my Twingo GT, So far what i have gathered is that the Front end of a Twingo (Mk2) is the same as a clio which i agree with. aswell as same struts 58mm spacing. the engine mounting points are the same (twingo upper mounts are enclosed at the...

currently investigating converting my Renault twingo gt to a 172 engine.... now i know that basically the chassis/front end of the twingo is identical to the Clio's Mk2? Mk3? as we have before fitted 58mm coilovers from a mk2 clio onto the twingo, and from just looking in pics, so the engine...