Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi all ive got a really strange problem with my car,its a 1996 rsi.the main beam flash function works with no lights on,and also with the side lights on but as soon as the dipped beamss go on,nothing happens, there seems to be no 'click' from the relay to show the main beam is engaged.Also there...
Hi all,im replacing the wishbone on my clio its a mk1 rsi but had to cut the botls coz they were seezed in the bushes and no amount of wd40 and hammering could persuade them to leave.no though i dont know where to get new bolts from apart fom a dealership.ive looked on gsf and aep parts but no...
Hi all ive got a p reg rsi 8v,have just mot'd and things were going well when i heard a big bang,and then a really fast banging sound from the front right,the driveshaft has sheared completely off! now the question is do any shafts fit these or do i have to use the certain rsi ones or can i put...
Hi all,ive got a 1.8 rsi on a p reg and was wondering can i put a FRONT stub axle on from a 1.4/1.2 model as mine has a stud snapped off where the bolt is risted in and instead of stud extracters etc im going to replace the axle.thanks for hellp
it has hanhers on the back box itself, then it has a hanger on the bendy bit that goes between the back box and centre pipe and thats all.no hangers atall on the pipe between cat and the bendy bit.i think its missing a bracket somewhere on the cat?
Hi all,i got a 1.8 rsi 8v non abs model on a p reg and need to know if the front wheel bearing is the same as the rest of the pertol range or do i get the one for the diesel,16v and williams models?
Hi all,ive got a 1.8 8v p reg rsi and the centre pipe seems to sit too low.its only got a single hanger on the centre pipe,and thats only on the seperate bendy bit that goes to the back box. So the question is should there be another hanger near the cat and if not how do i make it sit higher...
hi all,im changing the front wheel bearing and lower arm/wishbone. ive undone every bolt and nut but have hit a problem.the botls that hold the arm to the front subframe dont want to come out.ive persuaded them with some wd40 and a club hammer but still dont wanna know.any ideas on how to...
Hi all im stuck in a bit of a dilemma at the minute, I recently had an accident resuling in my car needing a new bonnet new front wing and new door.All the parts are replaced now but are in a lovely shade of red oxide primer. The rest of the car is a dark red/burgandy colour but i dont know the...
I need to oreplace my handbrake cable as the passenger side has snapped at the brake calliper end. Any advice for this atall? Does anyone have a step by step guide by any chance aswell,this would help me greatly! help appreciated
it cant be that because sometimes it will be working fine then it will just drop,asif the power has been cut of maybe the thing that counts the revs. any other ideas or is it a take out and look at it jobbie?
Hi all ive got myself a 1.8 8v rsi on a p reg. The rev counter is a bit tempermental some times it will work but then other times it plain refuses to do anything. Has anyone experienced this before and what was the problem if it was found? help appreciated
HHi all im new to clio ownership so i know nothing atall about this french pcoket rocket.i just got myself a 1.8 8v rsi on a p reg. its a good little car apart from the handbrake,it doesnt do anything atall even on full pull! im going to replace the rear pads but is there any other way to adjust...
hi all, im a bit new to all this motoring lark as well as the forum thing so sorry if this is in the wrong places. i have 1.8rsi 8v clio on a p plate (1996) and the top bit of the thermostat housing has snapped off leaving the car undrivaeble pretty much.can i get a housing off any 8v model or...