Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Its been a while since ive driven this car, even longer since ive updated this thread. But now ive started looking at it again I need some help.
I think the car needs a roll bar. I got hold of a twingo GT bar as I thought this would fit. It doesn't.
Does anyone have a dimensions below of a...
Hi all. Im after a bit of help with my driveshafts.
To cut a long story short I have to cut and shut my 172 driveshafts, the end fitting onto the gearbox (drivers side) is an internal spline with an end flange on, being held in by the bearing on the block.
I am replacing from 1.2 oasis shafts...
Been a while. Been getting on with it. Also been using it on and off as its just to loud.
Put the interior back in to see if it helps. It did a little bit.
My lovely wife got me a camera so i tested it out.
Got the loom back in place and tucked in somewhat out of the way.
and started to put the dash back in.
Its starting frequently now so i have zip ties the relevant plugs on the uch together so they are not coming off.
And replaced my rear mount
Ive been getting a missfire, which im putting to...
Hi all, another question.
How does the reverse light switch work?
When I removed my original loom it had the switch coming from the gearbox
Putting in the new engine that came with a loom it had the reverse light switch coming from the gearbox
After failing with my first loom I put in a what I...
Thats alot of wires out of my looms.
Unfortunatly 1 to many though. No need to worry ive identified the offender. The immobiliser 12v feed. Even though i was being methodical i still cut the wrong one. I was being ruthless though. If it wasnt plugged in whilst ive had it running it was cut off...
Been driving this for a few days with the loom plug going through the window and the bonnet strapped shut. Not ideal, but all was well untill day before yesterday when it started to not charge. Limped home and was running on 3. On idle its charging at 9v, so investigation there is needed. But...
stripped
172 driveshafts ready to cut down. Just need to get mine off to measure the length. Although im not sure ill need to on the drivers side. Seems to be alot of slack in the central joint.
172 brakes and hubs. Need a good clean and paint. Possibly in need of new bearings.
And some...
It wont be a main daily. But if it gets me good mpg itll be a fun daily along side the bmw.
It wont be to bad. Ive had worse. Im yet to hear it running with all the windows shut haha.