Recent content by pug_92

412

Does the 4 paddle plate have springs in it? A friend of mine had the wrong clutch plate on his c2 running itbs and dog box. Apparently it was the springs that failed and jammed the clutch 1 stage into a rally. So I'd say if the 4 paddle has the little springs and so does the standard you...

Broken down in it!!! I'm sat waiting for the AA in a garage forecourt with a split in my brake line. At least the super blue fluid looks cool on the floor.

I'm off that night so may pop along for a bit. Would be good to finally meet some other members from around here.

I would do that but during it's winter rebuild last year I removed all excessive wiring but now feel a cd player would make my journey to work slightly better. Off tomorrow so will have a potch around think the earth is a bit dodgey from when interior was re sprayed.

Nice one for the replies will have a look at the interior light fuse some time tomorrow. I don't have an interior light due to cage so hopefully its not connected.

hi, I've got a ph1 172 and the cd player doesn't work, I've checked the earth which is fine and the fuse seems to be ok 15A, is that right? is there only 1 fuse to the head unit? When messing with a multi meter, I got voltage from the yellow constant live, but not the ignition red terminal...

isn"t the bearing inside the top hat, I haven't got a set but would expect it too be mounted in there making the mount solid.

looks like a really nice example, I was so tempted to buy a 306 rallye about 2 years ago. tbh i wish i did now there soooooo many 1*2"s around here .

omp sell them, look on ybracing or try demon tweeks?

I've got the omp one in my car, it was a bit of a pain in the arse to fit. the main hoop with the cross was slightly twisted. so we cut the cross out bolted it down in the car and re-welded it. otherwise it went in pretty easy. the main design fault i can see is the rear feet go through the...

I sent mine back while they were under warranty, They were back within a week with 2 new pistons on fronts and all cleaned up. I just said they felt weird on the car a bit crashy etc. FOC - ftw.:cool:

The nuts holding the rubber mount onto the metal framework on mine were really tight, I had to use and nut gun on them. The mount itself comes off rather easily though, Think there was 3 or 4 m8 bolts holding the top part onto the car. and 3 m8's holding the bottom part to the gear box. Then the...

disappointing lack of sideways'ness. but does look like a really nice example

Really? I thought driving into things caused the most damage. will be keeping an eye on those micro fibre towels in my garage. lol