Search results

412

Does the 4 paddle plate have springs in it? A friend of mine had the wrong clutch plate on his c2 running itbs and dog box. Apparently it was the springs that failed and jammed the clutch 1 stage into a rally. So I'd say if the 4 paddle has the little springs and so does the standard you...

Broken down in it!!! I'm sat waiting for the AA in a garage forecourt with a split in my brake line. At least the super blue fluid looks cool on the floor.

I'm off that night so may pop along for a bit. Would be good to finally meet some other members from around here.

I would do that but during it's winter rebuild last year I removed all excessive wiring but now feel a cd player would make my journey to work slightly better. Off tomorrow so will have a potch around think the earth is a bit dodgey from when interior was re sprayed.

Nice one for the replies will have a look at the interior light fuse some time tomorrow. I don't have an interior light due to cage so hopefully its not connected.

hi, I've got a ph1 172 and the cd player doesn't work, I've checked the earth which is fine and the fuse seems to be ok 15A, is that right? is there only 1 fuse to the head unit? When messing with a multi meter, I got voltage from the yellow constant live, but not the ignition red terminal...

isn"t the bearing inside the top hat, I haven't got a set but would expect it too be mounted in there making the mount solid.

looks like a really nice example, I was so tempted to buy a 306 rallye about 2 years ago. tbh i wish i did now there soooooo many 1*2"s around here .

omp sell them, look on ybracing or try demon tweeks?

I've got the omp one in my car, it was a bit of a pain in the arse to fit. the main hoop with the cross was slightly twisted. so we cut the cross out bolted it down in the car and re-welded it. otherwise it went in pretty easy. the main design fault i can see is the rear feet go through the...

I sent mine back while they were under warranty, They were back within a week with 2 new pistons on fronts and all cleaned up. I just said they felt weird on the car a bit crashy etc. FOC - ftw.:cool:

The nuts holding the rubber mount onto the metal framework on mine were really tight, I had to use and nut gun on them. The mount itself comes off rather easily though, Think there was 3 or 4 m8 bolts holding the top part onto the car. and 3 m8's holding the bottom part to the gear box. Then the...

disappointing lack of sideways'ness. but does look like a really nice example

Really? I thought driving into things caused the most damage. will be keeping an eye on those micro fibre towels in my garage. lol

looks pretty good chaps, who's who then? black suit? red suit?

looks really cool, some might say it looks like you need stiffer rear springs. :cool:

i removed the rubber top mount on the car side, and just bolted the brace down. nothings fallen off and it doesn't squeak. kinda like solid mounts now. Gareth

i heard your car was with gary being wired, was tempted to pop in have a look around. van looks really cool, whens the first outting in the clio?

Cheers for the reply, I've got it sorted now. Took fair bit of head scratching thought there may have been a roll over stop valve in the tank but in the end it was the bulkhead going through the shell behind drivers seat sit ting to close to the tank. Which kincked the hose when tank was...

hi, i started my car for the first time in about 6 months after fitting braided fuel lines, all was going well until the pump started to sound like it was struggling. the engine is standard apart from 182 mani and induction mods. the car has no carbon canistor, and when the pipe to inlet...

they said to me its only tacked incase you need to adjust anything. we left mine in t all seemed to work fine. my cage was also about an inch too wide, so i notched the inner sill area, you only need enough room for the outter bolts to sit a bit lower.then when the box gets welded in it sorts...

I'm 6"2 and my seat seems to fit in the right place. it was a bit of a nightmare to fit. you just need to to man the f**k up as my girlfriend said and get on with it lol. it would be easier having a dash dodger but they look gash. now that mines fitted i think it looks ok. for a bolt in cage...

i've got the same cage. but haven't got any photos of fitting it. and the cars getting painted atm. is the cross fully welded in, in yours? mine was just tacked which i thought was weird. the rear arches/ wheel wells are really thin and seem to be made of cheese so probable for the best that...

I've just fitted a cage in mine, it was a nightmare. had to take the tank off, completely gut the interior and weld puncture plates in. really got fucked off while doing it, almost gave up and broke the car lol after being advised by a rally car builder and a few rally drivers the plates really...

Haven't seen anything about this years progress. what happening? are you guys still racing?

just over a litre from a dry system,

if you like the height of it now why not just get a set of koni shocks to match your aftermarket springs

got to agree with this, you don't want freezing cold brakes in an emergency stop situation

i've had pressed plates on my last 3 cars german white front and rear on my G40 only got stopped once, i was driving like a c**k though. black and silver on a volvo 340, and french on the clio. so in about 5 years of driving with them i've been stopped once, it was a £30 fine, no points. I...