What should this be connected to??

[jody391]

What should this be connected to guys??

 

[VXR killer]

Accoustic valve down by where the horn is.

 

[DaveDreads]

You don't need it, block it off.

 

[jody391]

So if left open what will be happening?

 

[DaveDreads]

You'll get a high idle from having a vacuum leak, it usually jumps to 3k rpm.

 

[jody391]

Thanks guys, just getting some time to tinker! 😎

 

[jody391]

Ok whilst you guys are around any ideas what these wires that are connected to the bonnet release cable are that have been cut??

 

[jody391]

These here?

 

[DaveDreads]

I know vey little about car electrics, does your car think the bonnets open when it's closed?

 

[jody391]

No I have no lights.
I can’t however see any bonnet switches? Should there be one and where? That could be it then.

 

[hopgop1]

Looks like bonnet switch wiring to me, would go where that hole in your grill in the above photo is.

 

[Touring_Rob]

They were for the bonnet switch I think. Often people unplug the switch to stop the alarm going off.

I used one of these to block the acoustic valve port:
Auto Silicone Hoses End Blanking Caps - Finishing Bungs Silicon Pipe Rubber | eBay

Open the car will idle poorly.

 

[DaveDreads]

No I have no lights.
I can’t however see any bonnet switches? Should there be one and where? That could be it then.

Top right hand side of the grill next to the text sticker.

 

[jody391]

Thanks guys mine has gone then. Atleast I now know what it was.
😎