Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
hi all.
A family member has lost the key to the 182.
What's the cheapest and easiest way of getting another key? Also do the door locks and petrol cap etc have to be changed?
Do I have to go direct to Renault to solve this ?
Thanks for your help
James
hi all.
A family member has lost the key to the 182.
What's the cheapest and easiest way of getting another key? Also do the door locks and petrol cap etc have to be changed?
Do I have to go direct to Renault to solve this ?
Thanks for your help
James
Hi have a problem with my airbag ecu
I've hit a cone and the passenger airbags bag has gone off
Is there anyway I can bypass this so I can continue my track day
Thanks
would a non working injector have something to do with this?
now running on 3 cylinders. i have taken the plug from injector on cylinder 4 and it did nothing
i guess the injector has had it but would this effect the 2k idle or does it just need re setting when i replace with a new injector.
thanks
Hi all.
Taken off my throttle body and inlet manifold because I seem to have a high idle issue.
Turn the car on and it's idling at 2k and doesn't drop.
I've tried taking the battery off and then leaving ignition on for 30 seconds or so and still high idles.
There's also a electronic noise coming...
Bilberry wheel cleaner- the best wheel cleaner I have ever used!
that's correct :)
will need dephaser doing soon
105k- open to offers really :)
will make this post a picture book when I can see daylight
Sorry about the poor pictures.
will try and upload some more at the weekend when there is daylight!!
start work in the dark finish work in the dark!!
Just a wash and wax
have got some winter sealant in the post will post more pics when the car has sealant ready for the next owner!
looking for...
hi
my rear wheel bearing is on its way out so decided its time I renewed my discs and pads all round
not sure on what make to buy?
mintex look fairly cheap and nasty so looking for something better?
any replies would be much appreciated
heater resistor pack
bridge the ports 1 & 5 with a piece of wire in the connector
if they work they will be flat out.... you need to buy a new resistor sensor or send yours off
ive just had mine done and works fine