Search results

Haha! Well it's fitted now and I have tested it and the verdict is in! It makes the car seem alot more solid and the steering tighter I generally think it has made the car feel better as before it didn't have great balance. Will be keeping it for sure :)

Ok thanks for the info :) appreciate it! I'll go for hard like you said, can you recommend any other ways I can improve the driving experience of the clio, it's a cup so it's pretty harsh but I wanted to make it smoother if possible :)

So would you recommend the soft setting then or do you think from experience the harder setting would be better :)? Thanks

Well the holes aren't that far from each other as it's only a 2 holed version. I see why people would say that, I have seen a 3 holed version and that would make a difference.

http://www.k-tecracing.com/show_product.asp?id=3960 Is the bar and the attached file is the fitting instructions

Well it's easy enough to swap isn't it? I'm getting it fitted by a garage that's doing my service so just wanted them to set it up but all the instructions say the end one is hard and the inner is soft! It's mixed what setting to have it on but I don't want it to drive crazy haha

Hi All, I have searched for other questions regarding this but can't find any! I have just purchased a whiteline anti roll bar the clio 182 and was wondering what the best fitting it for general Road use as I won't be using it for track. As there are only 2 fitting holes would I want to use...

Hi All, Just got hold of some washer blanks from streamline carbon and they look like a shell of carbon. Do you need to take the existing washer blanks off in order to fit them as they don't seem to fit over them? Also anyone know how they come out (clips etc?) oh and one more thing is there a...

Yeah I could just fit a standard bolt for that area I suppose then?

Sounds good buddy, how do I get into contact to order these bits? Oh and one more to the list you wouldn't happen to have the bolts that connect the bumper to the door wing panel near the door arch

Ok cool, and yeah it's the black pastic cover that sits under the fog light and runs up the front wheel arch and joins with it, if that makes any sense!

Cheers for the replies :) how much is one of these fitting kits @Renault Wolverhampton plus the fog light guard? Thanks

Hi All, I recently did a bumper removal and found a lot of my torque screws were missing and that my trim for the drivers side fog light was damaged, does anyone know where I can purchase some new torque bolts for the bumper and also were to find a new plastic undertrim for the fog light area...

Just to update the sensor didn't fix my problem, I'm still booked into a specialist for a check this Friday so I'll update then. Cheers

Well to update where I am, I have booked the car in for a diagnostic check this Friday but in the mean time I spoke to my local garage I have had a few jobs with and he says it's worth replacing the power steering pressure switch. I went to Renault and purchased one just to see if it will help...

It did have an o2 sensor fault but I took it to my local garage and they fixed it, he is a mechanic friend but be is a bit all over the shop so I don't even know if he charged my for the work but on the other hand I don't know what he did all I know is the engine light is gone and it hasn't come...

So are you saying to keep the factory fitted ballasts and just buy 6000 bulbs? If so what ones would you recommend. Thanks

I would never buy a cheap Chinese kit I only buy off reputable companies and the cost normally shows the quality

Was looking to upgrade to the 6000 as I had them previously on my clio 1.6, but it would look alot better I'm the projector style aswell as the beam pattern not being so screwed

It's definitely the 110amp one it's a reconditioned one with a year warranty Also it shows no fault codes

Yeah I did buddy but didn't have any change :( could this issue be caused by a faulty switch within the air intake? As I was debating on swapping it for another unit but not sure if it's the cause!

Hi All, For starting info: Had new alternator and battery fitted last month, also had full Cambelt plus the extras and retimed by a specialist. My 182 is having a little issue at the minute it starts ok it idles at 1100ish when cold then slowly works it's way down to 850 which is normal I...

Hi All, Was looking into replacing my standard front lights with xenon projector style ones, firstly can anyone tell me if this is a straight swap and secondly would it be possible to swap the original bulbs with a decent hid kit? If so can anyone tell me what bulb type I would need to order...

Thanks dude I'll have to check this next time I have the car in for some work :)

Resolved thanks

Hi All, Had my Cambelt done today and my fuel injector and on the drive home tried to use my cruise control and the button stays in but I don't get any lights or response, also the speed limiter does the same. Plus on a side note my interior light has stopped working it's the one with the map...

Took the car down to the Renault specialists in Rugby and found it was a faulty injector so it runs great now :)

Hi All, Been having a few issues with the old 182, I'll try my best to describe the issues and maybe someone can help me figure it out! Right the car has always had a lumpy idle since I have had It the last 2 months, it normally flags up an engine light saying misfire. I checked the map...

Yeah the steering wheel moves slightly it's a strange feeling not had it before in my other cars and the car is lowered on the standard cup suspension, but I wouldn't have thought that would be the cause? And danix I'm going to the Renault specialists soon to get my Cambelt done so I'll see...

I'm not sure what it could be but I'm beginning to think it might be tires? But it almost feels like the framework is loose or something it's really strange!