Search results

The horsepower upgrade damaged a bit some things! had to clean completely the engine bay, oil everywhere and things like that! @1700rpm it was doing already 1.4bar of boost, maintaining it until 4800rpm, the problem was exhaust gases too hot! fried the exaust turbine! maybe in a few month's...

Go for the FK silver line X, it's a koni sport shock with adjustable stiffness, with springs with correct weight ratio... best bangs for bucks!

Well and now the mechanical upgrade begins! que GT1646V with a cold part from a GT1749VB Here are some photos of the original turbo, the KKK KP35, and photos of the main reason I am changing this. The EGT's where so high that the hot part of the turbo cranked the waste gate could...

Autódromo de Braga - Renault track show 8/05/2011

it's not a 197, but it's a DCI, same interior, hope it helps.... my opinion, too dark, i'm gonna take it off, the interior is too dark, too dead... prolly will use the gray carbon film from 3m

A goodie to the car's power is almost done, just needing to change the manifold, and solder the one from the DCI engine

just a minor update... red wheels :p Just ordered the tow strap in red too :p In the weedkend i'll probably do a photoshoot with more light for you to see the wheels color :p

A few updates on the exterior and dynamics of the car FK springs 60/40mm fitted Rear Bumper fo the clio 3 ph2 without the rear fog lights

I friend of mine found them in a wrecking yard here in Portugal, actually at this moment nearby theres a red 197 with the interior completely new, just with a little accidente in the passanger side ( euro edition ), with no damage in the interior. The guy is asking 750€ for the seats, door...

New update: Leon Cupra II lip

Just to upload a foto to the thread XD

congrat's it looks like you got the geometry working just fine at what rpm's do you have Max boost pressure? 1800? 1600?

try emailing this guy for advice http://www.hifimobile.fr/installation-renault-clio-3-sport-id21-inst105.html

th GT spoiler is the best one in my opinion. the most discrete, and better looking think it comes in the clio 200 (MK3 Ph 2 or 3.2)

good choice for the rear lights...

be aware of the cable diameter... it may not be suficient for the amp+speakers you are putting

a oil radiator in the front solves the problem of overheating XD then it's set for the 1749V or 1749VC/mv my question is, will the injection system be able to deliver enough diesel and with pressure without cranking, so i can have max boost @ 2000rpm at least? this is the only question for...

Good pictures... try putting wheel spacers in the front too XD then you will note the diference @ high speed at the cost of agility in small corners. Are you liking the coil's H&R? confortable?

Can I ask what oil temps you are seeing? around 90/100º i know that, i'm seeking for opinions on what to buy to take out those momo's, but I have no ideia, I just want a good wheel, resistent and light to. A friend of mine want's me to buy ultraleggeras, bu i don't like them, too...

the led are great, the recaro's are cool but are needing a litle repair. the only thing i didn't like is the bleu on the vents, etc... that too much blue i think

that as been done for a few times now, since it's the 4º setup of tires and everytime I change them I do it.

for the dash, try using the Megane 2Ph2 LCD, its the same LCD, but in white with black letring

It's in my plans to change the wheels to 17", but wich ones?

Aveiro/Oporto

Well Here is my clio 3 1.5DCI 85bhp, I have been reading this forum from a Year or so, and I think now is the time to post somo fotos of my renault XD Sorry if it's not a mechanical project, but this year it will be changed(i promise), new turbo, exhaust line, oil radiator, new Intercooler...

what source will it be???? what do you want? quality or spl?

Leds for everything except for direction and backwards that's the normal bulb.

45mm is hard + the bilstein, the suspension becomes a bit disconfortable, but as i live in Portugal, these roads are full of holes so, i don't bother any more.

yep, these are the leds ones. beware that you should change the plastic supports for new ones to fit the new taillights.