Search results

As this involves the engine I assumed this to be the right section. Has anyone had this done? I have a megane gt 150 mk2. The mpg is around 42 regardless of the type of diesel I use. Also Would I benefit from blanking my egr valve?

Had the snap on plugged in an she says wheel speed sensor circuit RR. So instead of spending out on a new sensor I bought a working second hand hub off a mate. Fitted it an no change still all the lights on, cleaned up all the hub cleaned the sensor both ends plus the plug at the front end, am...

After my s5's performance today (shockingly bad) iv decided that we need one. Can anyone recommend one please?

Hi guys I bought the cable that hinges to the yellow cable in the back, an bought a update list unit. But no display, but I can get it to code as I practiced how to do it blind. Plugged it into my Samsung s5 an as I can't use the stalk or the display I'm guessing I need the display for the...

Hi guys I'm about half way through finishing my engine build but I've heard of a metal kit instead of the normal plastic one. Can someone please post me up a link please.

I'm getting this code using my snap on Code reader in the abs system, I think it's unrelated to my other issues. But I believe this may be the reason I have had the serv light on for ages. This link may help me tho http://www.scribd.com/mobile/doc/122170546

I was happy with just unplugging the map sensor an having a higher idle than normal but it was only a quick fix, now after looking harder an changing loads of parts an nothing would get rid of the bags of misfiring when I flatted the throttle, until I disconnected the lambda sensors an it would...

Has anyone ever had just the serv light on, with no others? No abs, no esp, no eml.... ? The problems I'm having I think is linked to that dame light . Clutching at straws here but after changing most of the sensors an not found the problem. Since changing the engine that's the...

From the top. I bought the car with a dead engine, bought new engine, changed the belts, clutch, water pump ect. Now when she is cold she has a slightly lumpy idle minor car jolt. Also runs fine shifts nicely. When warm say at end of journey it will stall when about to park but...

From the top. I bought the car with a dead engine, bought new engine, changed the belts, clutch, water pump ect. Now when she is cold she has a slightly lumpy idle minor car jolt. Also runs fine shifts nicely. When warm say at end of journey it will stall when about to park but...

Anyone got one near me? I'm told they can tell me if I have a fault in the loom? As I'm changing sensors an components an not getting result, sso this is my next option. Anyone?

An also same one flashes once on the motion to put it in reverse. The light that flickers is the rear fog lights. WTF?

An also same one flashes once on the motion to put it in reverse. The light that flickers is the rear fog lights. WTF?

Mine is a constant 420 would not change at all no matter what I did.

When foots down it pulls nicely, MPG a bit poor around town, an we can rule out injectors as they have been sonic cleaned. Also wile changing down, say to a junction she kangaroos an i haven't even got foot on throttle. Any ideas? Had cleaned injectors An new pre cat lambda...

What does this mean in English?

Hesitation on blip of throttle, sometimes bad an others it's acceptable. Once at 5000 RPM engine management light starts flashing till revs go down past 3000.

On the 182. Speed sensor I thought the abs sensor on the near side? I think mine is faulty an need to change it. Also my esp won't turn off now I'm assuming that's because of the faul? Also hesitation in review but no codes. Any ideas guys?

Just done n engine change an now I have an abs light staying on, plus engine management, an shift light. Abs is on all the time, rev the car up an the management light will flicker, then leave it to idle an the shift light an managementlights wi ll come on together then the engine will...

As above are they any good?

For some reason my snap on mt2500 won't communicate with my ecu, everything is plugged in tho. Can any one suggest anything to check?

I got engine out today an I've swopped most of the parts over to new engine, I'm getting the mo.t 1509 tomorrow to time her up I just need help putting it back in if anyone is able to help Monday?

How strong are they? A few months ago I bought an engine with 55k an i wanted to no how strong they an if its worth changing?

Can the seat trim be pulled or peeled back to put the heat pads on?

I no its probably been asked on end of times but what is the dephaser Allen key size?

I no it might be different so that's why I'm asking. On the mk1s iv had valeo an Sach I once bough a LUK an it performed brilliantly an also made the clutch pedal lighter which I put as a plus. So is it the case for the Mk2's?

I'm looking for genuine parts but as normal there very expensive I'm looking at £60-70 just for t he water pump, an other makes any good?

Of what to expect, I bought a 182 an i was told that the he expects the cambelt has gone, after gettingit home iI pop the bonnet an first thing I noticed was no water in the header tank, then I squeezed a pipe an no water even went into the tank. Af ter looking around I find the rad bleed...

Hi guys it's time start building the engine an i wanted to get the crank balanced, it's going to be my daily drive so I need a good clutch have you guys got anything against the uprated valeo clutch? An is there any good benefits from a lightened flywheel?

When first start it's fine but after 5 mine if I put the clutch down 9 times out of 10 she stalls but it's never a problem to start again but getting it to idle is it can be done but very slowly taking the revs down to idle at 900.Every sensor is new an i mean everything. But this problem...