Recent content by windle

Cars wired engine bay side done, inside is still a bit rough but enough to book the mapping in. its in with efi parts Tuesday the 5th. due to the ECU being for a clio 197 and us wiring it not 100% sure it will fully function and be fully mapped with power run etc as some of it is guess work but...

well it runs once again! the 12v feed for the fuel pump/coils isnt working for some reason from the ECU but when given a direct feed to both she did actually fire up. plan is to tidy the loom now properly check the sensors are working speak to SCS around this wire and get it booked for mapping!

off the shelf wiring or custom?

Which car is it in? Ecu looks a great piece of kit just not very easy when half the pics aren't documented

that will help, cheers will certainly give it a go. The camber is actually measuring positive on the front at the min but only threw them on quickly so will see if I can adjust the camber bolts on that one. wiring looks a mess at the min but we are just trying to make sure everythings working...

update time finally! Driveshaft is back and looks like a work of art very impressed with that. shaft is in and built gear oil replaced so that part is ready to go stand alone, have decided to go stand alone and have been talking allot to chris at EFI parts. We are going for an SCS delta ECU as...

hes keeping engine, going to be took apart to see whats failed and built back with a spare one he has. the GHA are ok but then i have nothing to compare to. i run 550 front 650 rear i think from memory driveshaft is now at the shop being built from scratch, the spares bits that i bought had a...

it deff sounds big end so ill let you know when he strips it! isalnd flat is not the best idea no, ive seen the crashes there so dont go anywhere near that!

he was, he decided he could take it flat at 125 but turns out you cant. car dug in and went up on its side but luckily came back down! Lesson learnt heard good things about dave mac shafts, shall give him a shout also

Well Oulton didn't go to plan at all. I have finally found the limits of the shafts! First session on semis went without hitch had a good run out with a quick super charged BMW can be seen in video below. weather was good so put the slicks on which have been on before a good few times. started...

Drive by with brother driving

update time! was a bit of a rush in the end to get it ready for anglesey on the 16th but just about managed it. Day was a bit of a wash out weather wise so didnt really get to push it all day but car behaved perfectly, no issues which was nice. car just needs a quick check over and good to go...

fibre glass panels all fitted, just need to cut the aero catches in tonight then the wrappers are coming Tuesday/Wednesday. then the putting it all back together begins!

splitter is just ply just chop your own up :)

BYC splitter mate bolts to the chassis with his own brackets, nice piece of work think he sells them off the shelf now but not sure how far behind he is after a trip the the USA http://bycdesigns.co.uk/index.php?route=product/product&path=67_17_64&product_id=104 it was my car he used to mock...