Recent content by NathanV

This was really useful. I had a couple of instances where fog started coming out of the air vents after going over a bump. Also noticed fluid in the evaporator housing under the pollen filter. Removing the wiper mechanism & the alarm module enabled me to remove the duct (pull it over towards the...

I had exactly the same issue with my cat flange disintegrating. So I designed an easy-fit flange that requires no welding and uses some of the parts from the standard fitting kit. Although I'm now thinking the kit could be eliminated, as springs are available separately. The bolts are...

I had a similar issue with my exhaust manifold flange rusting through. So I designed a flange to fit without having to remove or weld the manifold, plus it can be used with the Renault exhaust fitting kit. I fitted the flange this morning, but the cat flange also disintegrated on one side...

Would someone be so kind to provide me with the downpipe diameter (at the flange) and the distance between the centres of the two flange bolt holes on a standard 182 manifold? My Clio developed a bit of a rattle the other week, so at the weekend I can a quick look to see what the issue was...

I had a similar problem, it turned out that the pin connectors on the pump needed adjusting slightly (I used a small screwdriver, very gently) so there was interference between the pins & mating connector, hence possibly why the pump works on the other connector(?). I only worked this out after...