Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
They wont. There is one exemption for full on Rally cars that you may get away with, official docs are here: http://www.dft.gov.uk/vosa/repository/SN%2001%202013%20V1.0.pdf
Two different types of rack, the more expensive one is about £40 quid and the cheaper is half that. Unfortunately Renault cant tell from the Chasis number which is fitted, so its crawl under the car time.
Hi all, was at the track evening at Snetterton last night taking some photos of some mates and noticed a few Clios out enjoying themselves so thought i'd post up here :cool:
http://picasaweb.google.co.uk/maff667/SnettertonTrackEvening#
My littleuns named my 182 "Nigel" for which they were sent to bed. Unfortunately it kinda stuck... Eventually i gave in and it its "Nigel the Clio" Ugh.
You can make some really good use of the longer lenses, especially outdoors, people look far more natural if you got a bit voyeur and dont let them know your taking the pic.
In that vein I gave my 6 year old my 350D and let her wander about taking shots, people react so differently to kids, it...
Nope, the D bush has a lip round the edge so there was no metal to metal contact on mine, no clonk, but if the bushes are even further gone than mine were its possible i guess.
From inside the c0ckpit mine was fairly obvious, after a 90 degree left turn the steering wheel would be on the piss to the left when driving in a straight line, but then slowly go back to almost straight as i continued to drive, also it was very vague on turn in and would float about under...
I've read the guide but that's cam and auxiliary together, do you need to remove the engine mount and move the engine up and down just to do the auxiliary?
My bargain 182 had some very vague steering when I picked it up, and after taking it to get the tracking done, it couldnt make up its mind where the wheel should center, the guy doing the laser alignment finally twigged the rack bushes had died... and the whole thing was sliding about.
So off i...