Recent content by JMR

Nice car Cookie They are great machines even when the mileage gets high. I had an 08 GT with 89k miles on it, sold it trade earlier in the year (March) and got £5k for it. Dealer sold it for £6k within the week. It had full Honda history and hadn't had any major problems or repairs as I knew...

I really didn't want mine to be lowered, but I didn't want to just replace one when I could do all four for not much more. Turns out the opposite side front had a crack in it too. They drop the car 15-20mm on a Cup. Probably looks better for it. Handles better.

Bear in mind if you're driving with a broken spring and you know about it, it would be frowned upon in a very negative way if you had an accident directly relating to sudden loss of control of the vehicle or part of the spring ejecting from the vehicle and causing an accident otherwise. I was...

Nice haul Dan :cool:

Does look like the back box to centre pipe goes under the rear beam on the pic

Needs new battery ?

On my Cooksports the right rear is fitted and the Cooksport writing on them is the correct way round. (as below) On the left hand side, the spring is fitted the opposite hand, so the Cooksport writing is upside down. (unless its printed wrong, but the writing is definitely upside down) Does...

On offer at moment at Halfords £35 http://www.halfords.com/motoring/garage-equipment/trolley-jacks-axle-stands/halfords-2-tonne-trolley-jack-low-profile Same as the SGS low profile one but different colour.

The garage seem to have made a nice job of fitting it... Fits nicely within the standard (newly replaced in Nov) hangers My rear beam is going to get cleaned treated and painted in a couple of weeks so apologies for muck Fits nicely with the centre hanger that I replaced too I was a...

So it arrived :cool: Picking up a new clamp to replace the nasty one which holds the cat/centre pipe in the morning. Fitting on Saturday

Good stuff Chris How much did you get the standard exhaust for? Or is it a used one? Renault new prices are daft

Get a matt or satin lacquer to seal the finish in

Thanks for the pointers fellas. I will leave the screws in that are already there, as reading an old pdf in the guides section that fuBar did a while back (for removing the front bumper) it turns out these screws hold the bumper on underneath. Also on the KTEC carbon fibre splitters, there is a...

So what are these screws already in holding on :confused: ? Do I replace the screws in the same place?

Just picked up a Fabia splitter for the grand old sum of £13.97 :smile: They were in stock at the Skoda garage I pass every now and again, would've been rude not to at that price. Anyway I have searched the forum and have a question I don't know/ can't find the answer to. I've looked under my...