ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by Craig_RS

  1. Craig_RS

    Steering Wheels (Snappy Ones)

    Plus one for some contact details please. Been meaning to have this done for a while. Much appreciated
  2. Craig_RS

    Fault reader stuck mid scan

    Only used an obd2 reader and that was the fault. Not sure about live reader?. I've reset it now and its stayed off but ive only drove about 5 miles since. Maybe the wiring on the second lambdas not quite right? It was taken out the cat and stuck into the decat at a different angle. Maybe wires...
  3. Craig_RS

    Fault reader stuck mid scan

    Well it' been mapped and they removed code p0420 which was meant to be cat lambda that comes on with a decat... so I'm surprised there is even a light on to be honest. Even though this is a different code P0136 is : O2 sensor circuit malfunction (Bank 1 sensor 2) this was the one that came...
  4. Craig_RS

    Fault reader stuck mid scan

    Manage to diagnose the fault. More info here https://www.cliosport.net/threads/fault-code-p0136-question.817366/ Notnsure what it means to be honest
  5. Craig_RS

    Fault code P0136 question

    Hey guys. I've reset it but I'm wondering a few things. I'm running a decat and have used one of those L shaped adaptors (screws into the decat and lambda screws into that). These are meant to try and fool the sensor. No light came on within 150 or so miles but then I got the clio 182 remapped...
  6. Craig_RS

    Fault reader stuck mid scan

    Hope not Na that was taken off. This light just appeared last night
  7. Craig_RS

    Fault reader stuck mid scan

    Cheers guys. I tried a more expensive one with no joy. Car runs fine (clio 182) and I think it' to do with the decat, although it had a remap and this was meant to be erased so I'm stumped
  8. Craig_RS

    Fault reader stuck mid scan

    This is the second one I've tried. My friends was a bit more expensive and just kept coming back couldn't establish a connection
  9. Craig_RS

    Fault reader stuck mid scan

    Got the orange eml on so got myself one of those cheap obd2 readers. It will establish a connection but gets stuck mid scan at 2 bars. If I donitnright ignition off it scans fully then says there's no fault codes. Very annoying. Plugged it in. Waited. Turned ignition on. Starts scan and then...
  10. Craig_RS

    182 remap scotland

    Well it' not exactly what was originally discussed so technically they should. We shall see
  11. Craig_RS

    182 remap scotland

    Can imagine it'll do my nut in very shortly. They should be able to make a bit tamer if I ask or just take it off completely They quoted me crackles not full on backfires lol
  12. Craig_RS

    182 remap scotland

    Doesn't sound that bad when out driving to be honest
  13. Craig_RS

    182 remap scotland

    I was told they would add a bit crackle to the overrun, wasn' expecting full on bangs. I got a vid I'll try upload it. It's my daily at the moment Yeah!
  14. Craig_RS

    182 remap scotland

    Is this the same as the pops n bangs rs tuner map? I've heard that can damage the engine? It's not excessve but sometime it's more like pops and gunshots and flames...
Top