Recent content by BMcN

Are there any other tests that I could do to confirm? Would hate to spend £60 odd to find its not that.

Ok as a previous thread I have had my emission light on, I hooked up RStuner and plotted the front o2 sensor, it was only reading about 9-19mv as below: Ok, tonight I replaced the pre cat lambda and put RStuner back in and its still the same, around 9-19mv. So what can I try...

Sorry to dig this one back up but the light came back on and I have an MOT this week. I have done 2 screenshots, one plotting the live data as Lagerlout said. The front o2 sensor is jumping between 9mv and 19mv, so I guess its needing replaced. (Light blue line) Is this the correct one...

Anyone?

Car used to have a decat and I replaced it with a standard CAT, after a few miles the emission light came back on. Secondly, I used RSTuner and loaded on the remap, ever since then when accelerating slowly or even trying to hold a steady 30 in 4th or similar - the car is very jumpy and...

At the moment I have a KTEC Ultra exhaust and decat. I have bought a Scorpion RS192 that is designed to fit to a standard cat, the only cat I have has had the standard Renault exit cut off so now it won't fit the RS192. Is there anywhere I could buy a adapter to weld back on to the cat so...

Yep that looks and sounds right. So I could simply go 2.5 straight out of the cat and into the centre section or maybe 2" to 2.5". Thanks for your help.

From memory I cannot recall a removable sleeve on the Ktec. I thought the decat on mine goes inside the centre section then sealed with a D clamp. Mod looks good though.

I have a original 182 cat but someone has welded a adapter on to make it fit another exhaust system. Can anyone tell me what size the original pipe is coming out of the CAT? And what size it would need to be to fit a KTEC ultra centre section? Thanks.

Anyone else have any ideas on the exhaust?

I have not taken anything off, I bought the car with the one pictured on it and also got the one pictured on the grass with it. Just trying to identify what is what. I am not sure on the filter, I do not think I will go open cone. I am just surprised how little noise there is (i.e. no noise).

Ok, here are pictures of the exhaust I now suspect to be prospeed, possibly with a reducer welded to it at the cat. Anyone have any other thoughts?

Thanks Dave, I will have a look at the second exhaust I got with the car. I see the post said the original was rotten, but from what I saw of the 2nd one I got it was ok - so maybe it is a prospeed. What is your opinion on why I can't hear the induction noise? Acoustic valve make that much...

Thanks Dave, just did a bit of searching and people do rate it highly for both power and noise. Strange that I can't hear it! I will try the acoustic valve first and then maybe a new filter in it. 100% on the exhaust? The post the previous owner made did say he was going to 'replace my...

I googled the V6 one and can't see anything resembling this? Does it looks like a generic pipercross one and a samco silicon hose to make it fit? Or is it an actual kit for the 182?