Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Thanks PP172, i’ve now ordered some black tab bumper inserts. I decided to paint my inlet manifold/ plenum chamber today, i’ll rub down the Renaultsport logo when the paint has fully cured...
The hardest part for me was realigning the motors with the star holes. I had to turn the car on and adjust the settings to match as closely as I could, but one motor was in a position the star-hole couldn't get to, so I had to encourage the motor to move with some pliers.
I also had this same...
I had the same issue with “no cold air from the a/c reaching the cabin vents” & i’ve just successfully repaired the broken piece with a jubilee clip, I had to be a contortionist to fit it but with the help of this thread I just about managed to get the job done! ?
I fitted the front strut brace & wheel spacers last week and I eventually got the Fabia front splitter fitted today so I thought i’d post a few pic’s...
(I cut the splitter in the centre, this enabled me to keep both ends.) :-)
(Ps) while I was under the rear end fitting the arb I noticed that I have a cracked/sheared O/S/R coil spring, this now gives me a reason to lower the car by 25mm all round in the near future. Also on the shopping list will be powerflex engine & gearbox mounts!
Hi guys, i’ve been on a bit of a spending spree lately! (£500.00+)
Today I replaced my tatty looking rear number plate, I also fitted an OMP rear upper strut brace & whiteline adjustable rear anti-roll bar.
I also have an OMP front upper strut brace, braided brake lines, 4x 15mm wheel spacers...